Hotpoint washing machine NM11 845 WC A UK manual

The Hotpoint NM11 845 WC A is a freestanding washing machine with an 11kg capacity, A+++ energy rating, and 1400 RPM spin speed. It features multiple wash programs, electronic controls, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V AC, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent drawer, drum, door seal, water inlet valves, drain pump, adjustable feet.

Feature	Description
Capacity	11kg drum for large loads
Energy Rating	A+++ for high efficiency
Spin Speed	1400 RPM for faster drying
Programs	Cotton, Synthetics, Delicates, Quick Wash, etc.
Delay Start	Set wash cycle to begin later (up to 24h)
Child Lock	Prevents accidental program changes
Anti-Flood Protection	AquaStop technology for leak prevention
Door Lock	Automatic during cycle for safety
Display	LED with time remaining and cycle indicators
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove transit bolts. Place on stable, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine.
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into grounded socket.

WARNING! Do not install in areas below 0°C. Ensure water pressure is 0.5-10 bar.

First-Time Setup

Power on machine; run initial empty wash.

Open detergent drawer: Add 1/2 cup of detergent to compartment II.
Select program: Turn dial to "Cotton 60°C".
Start cycle: Press Start/Pause; let complete to clean drum.
Set preferences: Use Settings button for buzzer volume, etc.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: NM11 845 WC A
Capacity: 11kg (cotton)
Energy Class: A+++
Spin Speed: 1400 RPM
Water Pressure: 0.5 - 10 bar
Programs: 15 including Eco 40-60, Wool, Sport
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V AC, 50Hz
Max Load: 11kg (cotton), 6kg (synthetics)
Noise Level: 74 dB (spin), 53 dB (wash)

Controls and Settings

Control Panel: Program dial, Display, Start/Pause, Delay Start, Speed/Spin, Temperature, Options.

Program Dial: Select from Cotton, Synthetics, Delicates, Quick Wash (30°C), Eco 40-60, Wool, Sport, Jeans, Mix, Drum Clean.

Options: Pre-wash, Extra Rinse, Anti-Crease, Delay Start (1-24h), Child Lock (press 3 sec). Display: Shows time remaining, cycle stage, and selected options. Settings Menu: Press Settings button to adjust end buzzer (Off/Low/High), remote control enable.

Connecting Water & Drain

Water Inlet: Cold fill only (blue hose). Drain: Hose to standpipe (max height 1m).

Turn off water tap before connecting hoses.
Connect inlet hose to machine (right side) and tap; hand-tighten.
Place drain hose in standpipe (min 60cm height) or secure over sink edge.
Check for leaks; run short cycle to test.

Tip: Use hose clips provided; do not kink hoses.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed max weight; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn dial (e.g., Cotton for towels/bedding).
Adjust settings: Use Temperature, Spin buttons if needed.
Start: Press Start/Pause; door locks automatically.
Pause/change: Press Start/Pause to stop; wait 2 min to unlock door.
End of cycle: Buzzer sounds; remove laundry promptly.

WARNING! Do not open door during cycle; wait for unlock indicator.

Special Functions

Delay Start: Press Delay button, set hours (1-24), then Start. Child Lock: Press and hold Child Lock 3 sec to enable/disable. Drum Clean: Run monthly with detergent in compartment II to prevent mould.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program.

CAUTION! Do not use abrasive cleaners; keep door slightly open between washes to air drum.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste disposal: Contact local council for recycling. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door shut firmly; check plug socket; press Start.
No water intake	Taps/blockages	Open water taps; check hose for kinks; clean inlet filter.
Leaking water	Hose connections	Tighten inlet/drain hoses; ensure drain hose not too low.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute load.
Poor washing results	Detergent/dosage	Use correct detergent type; follow dosage instructions; clean drawer.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk