Hotpoint washing machine NM11 1046 WC A UK N manual

The Hotpoint NM11 1046 WC A UK N is a freestanding washing machine with a 11kg capacity, A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, Direct Spray for efficient rinsing, a delay timer, and a large LED display. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent drawer, drum, water inlet valves, drain pump filter, and adjustable feet.

Feature	Description
Capacity	11kg drum for large loads
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM for faster drying
Anti-Stain Technology	Automatically targets tough stains
Direct Spray	Efficient rinsing system
Programs	16 programs including Cotton, Synthetic, Delicates, Quick Wash
Delay Timer	Up to 24 hours delay start
LED Display	Shows time remaining, cycle stage, and settings
Child Lock	Prevents accidental program changes
Adjustable Feet	For stability on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable) using supplied connectors.
Connect drain hose: Place hose into standpipe or sink, ensuring it is secure and not kinked.
Level the machine: Adjust the feet using a spanner until the machine is stable and does not rock.
Plug into a grounded 220-240V AC power outlet.

WARNING! Do not remove transit bolts before moving the machine into position. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run an empty wash cycle to clean the drum.

Power on the machine: Press the ON/OFF button.
Select a program: Turn the program selector to "Cotton 90°C".
Add detergent: Pour 100ml of liquid detergent into compartment II.
Start the cycle: Press START/PAUSE. Let the cycle complete.
Set preferences: Use the control buttons to adjust spin speed, temperature, and other options as needed.

CAUTION! Ensure the drum is empty before running the first cycle. Keep children away during operation.

Specifications

Model: NM11 1046 WC A UK N
Capacity: 11kg
Energy Rating: A+++
Spin Speed: 1400 RPM (adjustable)
Water Pressure: 0.5 - 8 bar
Programs: 16 including Cotton, Eco 40-60, Synthetic, Delicates, Wool, Quick 15'
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V AC, 50Hz
Noise Level: Wash: 53 dB, Spin: 75 dB

Controls and Settings

Control Panel: ON/OFF button, Program selector knob, LED display, START/PAUSE button, option buttons (Spin Speed, Temperature, Delay Start, Extra Rinse, etc.).

Detergent Drawer: Compartment I (Pre-wash), II (Main wash), III (Fabric softener).

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetic, Delicates). Options: Adjust spin speed (400-1400 RPM or Rinse Hold), temperature (Cold to 90°C), delay start (1-24h), and extra functions (Extra Rinse, Anti-Stain). Display: Shows time remaining, selected options, and error codes.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps. Drain: Secure hose to standpipe (max height 100cm) or sink.

Ensure water taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Check for leaks after connection by turning taps on slowly.
Ensure drain hose is not bent or submerged in water.

Tip: Use a drain hose extension if needed, but ensure it does not exceed recommended length.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, place clothes evenly in drum, close door securely.
Add detergent: Pour into correct compartment based on cycle type.
Select program: Turn knob to match fabric (e.g., Cotton for towels, Synthetic for blends).
Adjust options: Press buttons to modify temperature, spin speed, etc.
Start: Press START/PAUSE. The display will show time remaining.
Pause/Stop: Press START/PAUSE to pause; turn knob to reset to stop.
End of cycle: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not overload the drum. Balance loads to prevent excessive vibration.

Special Functions

Delay Start: Set 1-24 hours delay. Anti-Stain: Automatically adjusts for tough stains. Extra Rinse: Adds an additional rinse cycle. Child Lock: Press and hold START/PAUSE and Spin Speed buttons for 3 seconds to lock/unlock controls.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly: Remove, rinse under tap. Clean drain pump filter every 3 months: Open flap at bottom front, place towel, unscrew filter, remove debris. Run drum clean cycle monthly: Use proprietary cleaner or 1 cup of white vinegar on a 90°C cotton cycle.

CAUTION! Do not use abrasive cleaners. Ensure filter is tightly closed after cleaning.

Regulatory Information

Complies with EU Ecodesign and Energy Labeling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 0333 305 2265 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is shut; check power plug and socket; press ON/OFF.
No water intake	Taps off/hose kinked	Open water taps; check hose for kinks; clean inlet filter.
Excessive vibration/noise	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Water not draining	Drain hose/filter blocked	Check hose for kinks; clean pump filter; ensure standpipe not blocked.
Error codes on display	Various faults	Refer to manual error code list (e.g., F01: door lock fault, F05: heating fault).

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 2265; www.hotpoint.co.uk