Hotpoint washing machine NM10 844 WW UK manual

The Hotpoint NM10 844 WW is a freestanding washing machine with a 10kg capacity, A+++ energy rating, and 1400 rpm spin speed. It features multiple wash programmes, including a 15-minute quick wash, anti-allergy cycle, and steam refresh option. Key components include the main wash drum, detergent dispenser, control panel, power cord, inlet hoses, and drain hose. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10kg stainless steel drum, LED display, rotary programme selector, detergent drawer, water inlet valves, drain pump, and anti-vibration system.

Feature	Description
Capacity	10kg load capacity for large households
Energy Rating	A+++ for high energy efficiency
Spin Speed	Up to 1400 rpm for faster drying
Quick Wash	15-minute programme for lightly soiled items
Anti-Allergy	Special cycle to reduce allergens
Steam Refresh	Steam function to remove wrinkles and odours
Delay Start	Timer to delay wash start up to 24 hours
Child Lock	Safety lock to prevent accidental changes
Noise Level	Low noise operation (approx. 53 dB)
Dimensions (HxWxD)	850 x 600 x 600 mm

Installation

Unpack and inspect contents. Place on a level, solid floor.

Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot and cold taps (blue for cold, red for hot).
Connect drain hose: Place hose into standpipe or sink; ensure no kinks.
Level the machine: Adjust front feet to ensure machine is stable and does not vibrate.
Plug into a grounded 230V AC power outlet.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Remove any packaging from inside the drum.
Connect water and power, then turn on taps fully.
Select the "Drum Clean" programme (or a 90°C cotton cycle) and run without laundry.
Set language if applicable via control panel (default is English).
Familiarise yourself with programme selector and options.

CAUTION! Do not use detergent for the first maintenance wash. Ensure transit bolts are removed to prevent damage.

Specifications

Model: NM10 844 WW
Capacity: 10 kg
Energy Class: A+++
Annual Energy Consumption: 175 kWh
Water Consumption: Approx. 10,000 litres per year
Spin Speed: 1400 rpm (adjustable)
Noise Level (Wash/Spin): 53/75 dB
Programmes: Cotton, Synthetic, Delicates, Wool, Quick 15, Anti-Allergy, Steam, Drum Clean
Dimensions (HxWxD): 850 x 600 x 600 mm
Weight: 70 kg
Power Supply: 230V~50Hz
Max Load: 10 kg (cotton)

Controls and Settings

Control Panel: Rotary programme selector, LED display, start/pause button, option buttons (temperature, spin speed, delay start).

Programme Selector: Turn to choose desired wash programme (e.g., Cotton, Synthetic, Quick Wash).

Options: Adjust temperature (cold to 90°C), spin speed (0 to 1400 rpm), delay start (1-24 hours), extra rinse, pre-wash.

Display: Shows remaining time, selected options, and error codes.

Child Lock: Press and hold relevant buttons for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (hot and cold optional). Drain: Place hose securely.

Ensure taps are off before connecting hoses.
Use only provided hoses; do not reuse old ones.
Drain hose must be between 60 cm and 100 cm high to prevent siphoning.
Check for leaks after first connection.

Tip: Use hose clips if supplied. Do not overtighten connections.

Using Wash Programmes

Supports various fabrics and soil levels.

Sort laundry by colour and fabric type.
Load machine: Do not overload; distribute evenly.
Add detergent: Use drawer compartments (I for pre-wash, II for main wash, * for softener).
Select programme: Turn selector to desired programme.
Adjust options: Set temperature, spin speed, extra rinse if needed.
Start: Press start/pause button; door locks automatically.
After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not wash items contaminated with flammable substances. Remove coins and objects from pockets.

Care & Maintenance

Regular cleaning ensures optimal performance.

Clean detergent drawer monthly: Remove and rinse under warm water.
Clean door seal: Wipe with damp cloth to remove residue.
Run Drum Clean programme monthly: Use dedicated cleaner or 90°C cycle without laundry.
Check and clean pump filter periodically (see troubleshooting).
Exterior: Wipe with soft, damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Do not use steam or high-pressure cleaners.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically locks during wash. Overflow Protection: Shuts off water if detected. Imbalance Control: Reduces spin speed if load is uneven. Thermal Cut-out: Prevents overheating.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 0333 305 2263.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is shut; check plug and fuse; press start firmly.
No water intake	Taps off/hose kinked	Open taps fully; check hose for kinks; clean inlet filter.
Water not draining	Drain blocked/pump filter	Check drain hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute load.
Error code on display	Various faults	Consult manual error code list; reset by turning off/on.
Detergent not dispensing	Drawer blocked	Remove and clean detergent drawer; use correct detergent type.

Reset: Turn programme selector to off, unplug for 2 minutes, then restart.

Service: 0333 305 2263; www.hotpoint.co.uk