Hotpoint washing machine NLLCD 1044 WD AW UK N manual

The Hotpoint NLLCD 1044 WD AW UK N is a freestanding washing machine with a 10kg load capacity, A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features electronic controls, a digital display, delay start, child lock, and various fabric-specific cycles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital display, Detergent drawer, Drum, Door with safety lock, Water inlet valves, Drain pump filter.

Feature	Description
Capacity	10kg maximum load
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Programs	Cotton, Synthetics, Delicates, Wool, Quick Wash, etc.
Display	Digital with time remaining, cycle indicators
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Door Lock	Automatic safety lock during operation
Detergent Drawer	Compartments for pre-wash, main wash, softener
Noise Level	Reduced vibration and sound insulation

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or hook over sink edge (max height 100cm).
Level the machine: Adjust front feet to ensure machine is stable and does not rock.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Plug in and press power button.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
Set language: If applicable, use settings menu to select language (default ENGLISH).
Load detergent: Fill drawer compartments as per detergent instructions.
Select program: Choose appropriate cycle for your laundry type.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: NLLCD 1044 WD AW UK N
Type: Freestanding front-load washing machine
Capacity: 10kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 9,000 litres per year
Spin Speed: 1400 RPM (max)
Noise Level (wash/spin): 53/74 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 70 kg
Power Supply: 220-240V, 50Hz
Programs: 15+ including Eco, Cotton, Synthetics, Delicates, Wool, Quick 30'

Controls and Settings

Control Panel: POWER button, Program selector knob, Digital display, Start/Pause button, Option buttons (Delay, Spin Speed, Temperature, Extra Rinse).

Display Icons: Cycle phase, Time remaining, Child lock, Delay start, Spin speed, Temperature.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics, Delicates). Options: Adjust temperature (cold to 90°C), spin speed (0 to 1400 RPM), delay start (1-24h). Special Functions: Child Lock (press and hold specific buttons), Rapid Wash (reduces time), Eco (reduces energy/water).

Connecting Water & Drain

Water Inlet: Cold water connection (and optional hot). Drain: Hose to standpipe or sink.

Turn off water supply before connecting hoses.
Attach inlet hoses to machine and tap(s); hand-tighten plus quarter turn with pliers.
Position drain hose securely; avoid kinks and ensure height is within limits.
Check for leaks by turning on water briefly before first wash.

Tip: Use only provided hoses; do not reuse old hoses.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Pour into correct drawer compartment (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob (e.g., Cotton for towels/bed linen).
Adjust options: Set temperature, spin speed, extra rinse if needed.
Start: Press Start/Pause; door locks automatically.
Pause/Stop: Press Start/Pause to pause; turn knob to reset to stop.
End of cycle: Signal sounds; door unlocks after a short delay.

WARNING! Do not open door during wash; wait for unlock signal. Remove items promptly to prevent odors.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Press and hold Delay + Spin Speed for 3 seconds. Rapid Wash: Reduces cycle time for lightly soiled loads. Eco: Optimizes energy/water use. Drum Clean: Program for cleaning drum; run monthly.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal: Wipe with damp cloth to remove lint/residue. Clean drain pump filter: Locate behind lower panel; place towel, unscrew filter, clean debris. Run Drum Clean program monthly.

CAUTION! Do not use abrasive cleaners or solvents on surfaces.

Regulatory Information

Complies with EU Ecodesign and Energy Labeling regulations. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle appropriately. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power, door, child lock	Check plug/power; ensure door closed properly; disable child lock.
No water intake	Taps, hoses, filter	Ensure taps are on; check hoses for kinks; clean inlet filters.
Water does not drain	Drain hose, pump filter	Check drain hose for kinks/blockage; clean pump filter.
Excessive vibration/noise	Transit bolts, leveling, load	Ensure transit bolts removed; re-level machine; redistribute load.
Error codes on display	Various faults	Refer to manual error code list; common: E10 (drain issue), E20 (water intake).
Detergent not dispensed	Drawer blocked	Clean detergent drawer compartments.

Reset: Unplug for 1 minute, then restart.

Service: 03448 113 113; www.hotpoint.co.uk