Hotpoint washing machine NLCD 948 SS A EU N manual

The Hotpoint NLCD 948 SS A EU N is a freestanding washing machine with a 9kg load capacity, energy efficiency class A, 1400 RPM spin speed, and multiple wash programs. It features a stainless steel drum, digital display, delay timer, child lock, and various specialized cycles for different fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, Digital control panel, LED display, Detergent dispenser, Water inlet valves, Drain pump, Adjustable feet, Power cord.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1400 RPM
Energy Class	A (Energy efficient)
Display	Digital LED with time remaining
Programs	15 wash programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Door Lock	Automatic during cycle
Detergent Dispenser	Compartments for pre-wash, main wash, softener
Water Inlet	Cold & hot water connections

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach hoses to cold and/or hot water taps; ensure washers are fitted.
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Level the machine: Adjust front feet to ensure machine is stable and does not vibrate.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Plug in and press power button.
Run empty wash: Select "Drum Clean" or "Cotton" program at 90°C without laundry.
Set preferences: Use control dial and buttons to set default options if available.
Load detergent: Fill dispenser compartments as per detergent instructions.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: NLCD 948 SS A EU N
Capacity: 9 kg
Dimensions (HxWxD): 85 x 60 x 60 cm
Spin Speed: 1400 RPM (adjustable)
Energy Rating: A
Water Pressure: 0.5 - 10 bar
Voltage/Frequency: 230V / 50Hz
Programs: 15 including Eco, Cotton, Synthetic, Wool, Delicate, Quick 30'
Noise Level: Wash: 53 dB, Spin: 73 dB
Weight: 70 kg

Controls and Settings

Control Panel: Power button, Program dial, Start/Pause, Delay timer, Spin speed reduction, Temperature selection, Extra rinse, Child lock.

Program Dial: Turn to select wash program (Cotton, Synthetic, Wool, Delicate, Quick, etc.).

Settings: Adjust temperature (cold to 90°C), spin speed (0 to 1400 RPM), delay timer (1-24h). Special options: Pre-wash, Extra rinse, Easy iron. Display shows time remaining, selected options, and error codes.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot). Drain: Place hose in standpipe (max height 100 cm).

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Secure drain hose to prevent slipping.
Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Pour into correct dispenser compartment.
Select program: Turn dial (e.g., Cotton for towels/bedding).
Adjust settings: Set temperature, spin speed, extra options.
Start: Press Start/Pause; door locks automatically.
End of cycle: Signal sounds; door unlocks after a short time.
Unload promptly to avoid wrinkles.

WARNING! Do not open door during wash; wait for unlock signal.

Special Functions

Delay Timer: Set wash to start later (1-24h). Child Lock: Press and hold buttons for 3 sec to lock controls. Extra Rinse: Adds rinse cycle for sensitive skin. Easy Iron: Reduces wrinkles by lower spin speed.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, and run drum clean cycle.

CAUTION! Unplug before cleaning. Wipe exterior with damp cloth; do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is shut; check power outlet; press Start.
No water intake	Taps off/hose kinked	Open taps; straighten hoses; check water pressure.
Excessive vibration	Transit bolts/leveling	Remove transit bolts; adjust feet for level.
Water not draining	Drain hose blocked	Check for kinks/blockages; clean pump filter.
Error code on display	Various faults	Consult manual for code meaning; reset by power off/on.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu