Hotpoint washing machine NLCD 946 WC A EU N manual

The Hotpoint NLCD 946 WC A EU N is a freestanding washing machine with a 9kg load capacity, energy efficiency class A, 1400 RPM spin speed, and multiple wash programs. It features electronic controls, a digital display, delay start, child lock, anti-flood system, and imbalance detection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum, water inlet/outlet hoses, adjustable feet, door with safety lock.

Feature	Description
Capacity	9 kg maximum load
Energy Class	A (energy efficient)
Spin Speed	Up to 1400 RPM
Programs	Cotton, Synthetics, Delicates, Quick Wash, etc.
Display	Digital display showing time, temperature, cycle stage
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood System	Protects against water leaks
Imbalance Detection	Automatically redistributes load
Door Lock	Safety lock during operation

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water inlet: Attach inlet hose to cold water tap (3/4” thread).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Level the machine: Adjust feet using spanner; ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and power on; run initial empty wash cycle.

Select language: Press SETTINGS button to choose display language.
Run test cycle: Select Cotton program at 90°C without laundry to clean drum.
Set clock: Use TIME button to set current time.
Load detergent: Fill compartments I (pre-wash), II (main wash), * (fabric softener).

CAUTION! Ensure water inlet tap is open and drain hose is properly positioned.

Specifications

Model: NLCD 946 WC A EU N
Capacity: 9 kg
Energy Class: A
Spin Speed: 1400 RPM
Water Pressure: 0.5 - 10 bar
Programs: 15 programs including Cotton, Eco, Synthetics, Delicates, Wool, Quick Wash
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 230V ~ 50Hz
Noise Level: Wash: 56 dB, Spin: 76 dB

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, TEMPERATURE, SPIN SPEED, START/PAUSE, DELAY START, CHILD LOCK.

Display: Shows program duration, temperature, spin speed, remaining time, error codes.

Programs: Cotton (40°C-90°C), Synthetics (40°C-60°C), Delicates (30°C), Wool (hand wash cycle), Quick Wash (30 min), Eco (40°C). Settings: Temperature selection (cold to 90°C), Spin speed (0-1400 RPM), Delay start (1-24h), Child lock (press 3 sec).

Connecting Utilities

Water: Cold water inlet only. Drain: Standpipe or sink. Power: Grounded outlet.

Turn off water tap and unplug machine before connecting.
Connect inlet hose to cold water tap; ensure washers are in place.
Secure drain hose to standpipe (max 100 cm height) or over sink edge.
Plug into dedicated grounded socket; avoid extension cords.

Tip: Check for leaks after first connection by running a short cycle.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load items loosely (max 9 kg).
Add detergent: Fill appropriate compartments.
Select program: Turn PROGRAM SELECTOR knob.
Adjust settings: Use TEMPERATURE and SPIN SPEED buttons.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to pause; wait for door unlock symbol.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not overload. Remove sharp objects from pockets.

Special Functions

Delay Start: Press DELAY START to set start time (1-24h). Child Lock: Press and hold for 3 sec to lock controls. Anti-Crease: Keeps tumbling after cycle to reduce wrinkles. Extra Rinse: Adds additional rinse cycle.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run drum cleaning program every 30 cycles.

CAUTION! Do not use abrasive cleaners. Keep door slightly open when not in use to prevent odors.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug; ensure child lock is off; close door properly.
No water intake	Tap/hose/kink	Open water tap; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose blockage	Check drain hose for bends/blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Door won't open	Water in drum/safety lock	Wait for unlock signal; run drain program if water remains.

Reset: Unplug for 1 minute to reset electronics.

Service: Contact authorized Hotpoint service center.