Hotpoint Washing Machine NG98W IT Manual

The Hotpoint NG98W IT is a freestanding washing machine with a 9kg capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1400 RPM, delay timer, child lock, and anti-flood protection. Designed for household use with standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	9kg dry laundry
Spin Speed	Up to 1400 RPM (adjustable)
Energy Class	A+++ (most efficient)
Programs	Cotton, Synthetic, Delicate, Wool, Quick Wash, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	Leak protection system
Display	Digital with time remaining indicator
Door	Reversible, with safety lock
Dimensions (HxWxD)	850 x 600 x 600 mm

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; use spirit level.
Connect water inlet: Attach cold water hose to tap (blue marking); hot water optional (red).
Connect drain hose: Place in sink or secure to drain pipe (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Power on machine; run initial empty wash.

Check connections: Ensure water taps are open and drain hose secure.
Select program: Turn dial to "Cotton 60°C".
Add detergent: Pour into compartment II (main wash).
Start: Press START/PAUSE; machine will fill, heat, and run cycle.
Set preferences: Use OPTIONS button to adjust spin speed, temperature, etc.

CAUTION! First wash may contain residual water from factory testing; this is normal.

Specifications

Model: Hotpoint NG98W IT
Capacity: 9 kg
Spin Speed: 1400 RPM (max)
Energy Rating: A+++
Water Pressure: 0.5 - 10 bar
Power Supply: 220-240V, 50Hz
Programs: 15 programs including Eco 40-60, Cotton, Synthetic, Delicate, Wool, Sport, Quick 15'
Noise Level: Wash: 53 dB, Spin: 75 dB
Dimensions: Height: 850 mm, Width: 600 mm, Depth: 600 mm
Weight: 68 kg

Controls and Settings

Control Panel: Program dial, display, START/PAUSE, OPTIONS, Delay Timer, Child Lock button.

Display Icons: Time remaining, temperature, spin speed, child lock, delay timer.

Program Selection: Turn dial to desired program (Cotton, Synthetic, Delicate, etc.). Options: Press OPTIONS to adjust temperature (cold to 90°C), spin speed (0-1400 RPM), extra rinse, pre-wash. Delay Timer: Set delay up to 24 hours. Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps. Drain: Secure hose to sink or pipe.

Turn off power and water before connecting.
Attach inlet hoses: Hand-tighten; check for leaks.
Position drain hose: Use U-bend to prevent siphonage; max height 100 cm.
After connections, open water taps fully.

Tip: Use only supplied hoses; do not extend or replace with non-genuine parts.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Use compartment I (pre-wash), II (main wash), III (softener).
Select program: Turn dial (e.g., Cotton for cottons, Synthetic for synthetics).
Adjust options: Temperature, spin speed, extra rinse if needed.
Start: Press START/PAUSE; display shows time remaining.
Pause: Press START/PAUSE to pause; door locks during wash.
End of cycle: Signal sounds; door unlocks after 2 minutes.

WARNING! Do not open door during high-temperature washes; risk of scalding.

Special Functions

Delay Timer: Set delay start up to 24 hours. Child Lock: Prevents program changes during cycle. Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled loads.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run drum clean program every 30 cycles.

Detergent drawer: Remove and rinse under water.
Door seal: Wipe clean; remove debris.
Drum clean: Use program without laundry and with washing machine cleaner.
Exterior: Wipe with damp cloth; no abrasive cleaners.

CAUTION! Do not use bleach or solvents on plastic parts.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.eu or contact Hotpoint Assistenza Clienti at 800-123-456.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug and power; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Open water taps; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose/pump	Check hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Door won't open	Water temperature/safety	Wait for cool down/unlock; machine may still contain water.
Error codes (e.g., F01, F02)	Various faults	Consult manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 800-123-456; www.hotpoint.eu