Hotpoint washing machine NG 847 WM A IT manual

The Hotpoint NG 847 WM A IT is a freestanding washing machine with a 7kg capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1400 RPM, delay timer, child lock, and anti-flood protection. Designed for standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	7 kg (dry laundry)
Spin Speed	Up to 1400 RPM
Energy Class	A (Energy efficient)
Programs	Cotton, Synthetics, Delicates, Quick Wash, Wool, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	Leak detection system
Display	Digital with time remaining indicator
Door	Reversible for left/right opening
Dimensions (HxWxD)	85 x 60 x 55 cm

Installation

Unpack and remove all transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (and hot if applicable). Ensure seals are tight.
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure water pressure is between 0.5 and 10 bar.

First-Time Setup

Before first wash, run a cotton cycle at 90°C without laundry to clean drum.

Power on machine: Press POWER button.
Select language: Press SETTINGS button to choose display language.
Test run: Add detergent, select Cotton 90°C, and start empty cycle.
Adjust settings: Use SETTINGS menu for time, sound, etc.

CAUTION! Ensure transit bolts are removed to prevent damage.

Specifications

Model: NG 847 WM A IT
Capacity: 7 kg
Spin Speed: 1400 RPM (adjustable)
Energy Rating: A
Water Consumption: Approx. 45 litres per cycle (cotton 60°C)
Power Supply: 220-240V, 50Hz
Max Power: 2100 W
Programs: 15 programs including Eco, Sport, Anti-Allergy
Noise Level: Wash: 56 dB, Spin: 76 dB
Weight: 68 kg

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR knob, OPTION buttons (Delay, Extra Rinse, etc.), CHILD LOCK.

Display: Shows program time, options, delay time, and error codes.

Programs: Cotton (20°C-90°C), Synthetics, Delicates, Quick Wash (30 min), Wool, Silk, Sport, Jeans, Anti-Allergy, Drum Clean. Options: Pre-wash, Extra Rinse, Reduced Creases, Delay Start (1-24h). Settings: Sound on/off, end of cycle signal, reset to factory defaults.

Connecting Water & Drain

Water Inlet: Cold water connection mandatory; hot water optional. Drain: Hose to sink or standpipe.

Turn off water tap before connecting hoses.
Connect inlet hoses: Hand-tighten; do not overtighten.
Secure drain hose: Use hook provided; ensure no kinks.
Check for leaks: Run short rinse cycle and inspect connections.

Tip: Use only new hoses; replace every 5 years.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7 kg; distribute evenly.
Add detergent: Use dispenser compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob to desired program.
Set options: Press OPTION buttons as needed.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to stop; wait 2 minutes to unlock door.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during spin cycle. Unbalanced load may cause vibration.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Anti-Flood: Machine stops and drains if leak detected. Drum Clean: Run monthly without laundry at 90°C.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run Drum Clean program monthly. Check and clean drain pump filter every 3 months.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

CE marked. Complies with EU directives for low voltage and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +39 035 75 38 111.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check power outlet; press START.
No water intake	Taps closed/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Excessive vibration	Transit bolts/uneven load	Ensure transit bolts removed; redistribute laundry; level feet.
Water not draining	Drain hose blocked	Check hose for blockages; clean pump filter.
Error code on display	Various faults	Consult error code list in manual; reset by unplugging for 5 min.

Reset: Unplug for 5 minutes to reset electronic control.

Service: +39 035 75 38 111; www.hotpoint.eu