Hotpoint Washing Machine NF86WK IT Manual

The Hotpoint NF86WK IT is a freestanding washing machine with a 8kg load capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1400 RPM, direct injection motor technology, anti-vibration system, delay timer, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	8kg maximum load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Motor	Direct Injection for quiet operation
Anti-Vibration	Stable spin system
Programs	15+ including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
AquaStop	Leak protection system
Display	Digital with time remaining indicator

Installation

Unpack and remove all transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap (3/4” thread). Ensure washers are fitted.
Connect drain hose: Place in standpipe or sink (max height 100cm). Secure with hook if provided.
Level the machine: Adjust front feet to ensure machine is stable; use spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press POWER button.
Run empty wash: Select “Drum Clean” or “Cotton 90°C” program without laundry. Add a little detergent.
Set language: Press SETTINGS button to select language (default is English).
Test programs: Familiarize yourself with control panel functions.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: NF86WK IT
Capacity: 8kg (cotton)
Dimensions (HxWxD): 85cm x 60cm x 60cm
Spin Speed: Up to 1400 RPM
Energy Class: A+++
Water Pressure: 0.5 - 10 bar
Programs: 15 including Eco, Wool, Sport, Anti-Allergy
Noise Level: 53 dB (wash) / 75 dB (spin)
Power Supply: 230-240V ~ 50Hz
Weight: 68kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR knob, START/PAUSE, OPTIONS buttons (Temp, Spin, Delay), CHILD LOCK.

Display Icons: Time remaining, temperature, spin speed, delay timer, child lock, door lock.

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, etc.). Options: Adjust temperature (cold-90°C), spin speed (0-1400 RPM), delay timer (1-24h). Settings Menu: Press and hold SETTINGS to access language, buzzer volume, default settings. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Cold fill only (hose provided). Drain: Hose to standpipe or sink.

Ensure water tap is off before connecting hose.
Connect inlet hose to machine (right rear) and to cold water tap.
Place drain hose in standpipe (max 100cm height) or over sink edge.
Check for leaks by turning on water tap briefly before first wash.

Tip: Do not kink or bend hoses sharply. Ensure drain hose is not submerged.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Use dispenser drawer (main wash, pre-wash, softener).
Select program: Turn knob (e.g., Cotton for towels/bed linen).
Adjust options: Press TEMP, SPIN, DELAY as needed.
Start: Press START/PAUSE. Door locks automatically.
Pause/change: Press START/PAUSE to pause; wait for door unlock symbol.
End of cycle: Buzzer sounds; door unlocks after a short time.

WARNING! Do not open door during wash/spin. Wait for door lock symbol to disappear.

Special Functions

Delay Timer: Set wash to start later (1-24h). Child Lock: Locks controls to prevent changes. Extra Rinse: Adds rinse cycle for sensitive skin. Speed Wash: Reduces time for lightly soiled loads. Drum Clean: Program for cleaning drum (run monthly).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run Drum Clean program monthly. Check and clean drain pump filter periodically.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

CE compliant. Meets EU Ecodesign and energy labeling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.eu or contact Hotpoint Customer Service in your country.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug, power outlet; ensure door is closed properly.
No water intake	Tap/hose	Ensure water tap is on; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose/pump	Check drain hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level; redistribute load.
Leaks	Connections	Tighten inlet hose connections; check drain hose position.
Display error codes	Fault	Refer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service center. Do not attempt repairs yourself.