Hotpoint washing machine NF825WK IT manual

The Hotpoint NF825WK IT is a freestanding washing machine with 8kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features direct injection technology, anti-allergy cycle, quick wash options, delay start, child lock, and imbalance detection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent drawer, drum, water inlet valves, drain pump filter, and adjustable feet.

Feature	Description
Capacity	8kg laundry load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Direct Injection	Precision water distribution for better wash
Anti-Allergy	Special cycle to reduce allergens
Quick Wash	30-minute and 15-minute options
Delay Start	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Imbalance Detection	Automatically redistributes load
Noise Level	Low noise operation (approx. 53 dB)

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Power on machine; run initial empty wash.

Set language: Press and hold START/PAUSE for 3 seconds to select language (default ITALIAN).
Load detergent: Fill drawer compartments with detergent and softener.
Select program: Turn knob to "Cotton 60°C".
Run empty wash: Press START/PAUSE to begin; this cleans drum.
Adjust settings: Use OPTIONS button to select spin speed, temperature, etc.

CAUTION! Ensure water connections are tight and no leaks before first use.

Specifications

Model: NF825WK IT
Capacity: 8kg
Spin Speed: 1400 RPM (adjustable)
Energy Class: A+++
Water Pressure: 0.5 - 8 bar
Programs: 16 programs including Cotton, Synthetic, Delicate, Wool, Anti-Allergy, Quick Wash
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 230V~50Hz
Max Power: 2200W
Noise (wash/spin): 53/76 dB

Controls and Settings

Control Panel: Rotary program selector, LED display, START/PAUSE, OPTIONS, Delay Start, Child Lock buttons.

Programs: Cotton (20°C-90°C), Synthetic, Delicate, Wool, Silk, Sport, Anti-Allergy, Quick 30', Quick 15', Drum Clean.

Options: Temperature selection (cold to 90°C), Spin speed (0-1400 RPM), Extra Rinse, Pre-Wash, Delay Start (1-24h).

Child Lock: Press and hold OPTIONS + START/PAUSE for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if used). Drain: Secure hose to standpipe or sink.

Turn off water taps before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Ensure drain hose is not kinked and is at correct height (50-100cm).
Check for leaks after connections.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob to desired program.
Adjust options: Press OPTIONS to set temperature, spin, etc.
Start: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to pause; turn knob to change program (if not locked).
End of cycle: Machine beeps; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature washes; wait for cool-down.

Special Features

Anti-Allergy Cycle: Uses higher temperature and extra rinses to reduce allergens. Quick Wash: 30' for lightly soiled loads; 15' for refresh. Delay Start: Set start time up to 24 hours later. Drum Clean: Run monthly with detergent to clean drum.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean drain pump filter every 3 months; turn off water, place towel, open filter cover, drain water, remove debris.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

CE compliant. Meets EU Ecodesign and energy labeling regulations. Disposal: Follow local WEEE regulations; do not dispose with household waste. For support, visit www.hotpoint.eu or contact Hotpoint Assistenza Clienti Italia at 800-123-456.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses/filter	Open water taps; check hoses for kinks; clean inlet filter.
Water does not drain	Drain hose/pump filter	Check drain hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine; redistribute load.
Error codes (e.g., F01, F02)	Various faults	Consult manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 800-123-456; www.hotpoint.eu