Hotpoint Washing Machine NF746WK IT Manual

The Hotpoint NF746WK IT is a 7kg front-loading washing machine with A+++ energy rating, 1400 RPM spin speed, Direct Drive motor technology, Anti-Allergy cycle, Steam Refresh function, AquaStop leak protection, and multiple wash programs. It features a digital display, delay timer, child lock, and is designed for built-in or freestanding installation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Digital Control Panel, Direct Drive Motor, Detergent Dispenser, Water Inlet/Outlet, Adjustable Feet.

Feature	Description
Direct Drive Motor	Direct connection to drum for reduced vibration and noise
Anti-Allergy Cycle	Eliminates up to 99.9% of allergens with high-temperature wash
Steam Refresh	Reduces wrinkles and odors without washing
AquaStop Protection	Automatic water shut-off in case of leak detection
Digital Display	Shows program time, settings, and error codes
Delay Timer	Program start delay up to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Multiple Programs	15+ wash programs including Wool, Delicates, Quick Wash
Energy Rating	A+++ for maximum energy efficiency
Spin Speed	Up to 1400 RPM for faster drying

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use wrench to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn clockwise/anti-clockwise to level machine; use spirit level.
Connect water supply: Attach inlet hose to cold water tap (3/4” connection).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and power on machine; run initial setup cycle.

Run cleaning cycle: Select “Drum Clean” program without laundry.
Set language: Press and hold “Start/Pause” + “Spin” for 3 seconds to select ITALIANO.
Load detergent: Fill compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn program dial to desired setting.
Start cycle: Press “Start/Pause” button.

CAUTION! Ensure water and drain connections are secure before first use.

Specifications

Capacity: 7 kg (dry cotton).
Energy Rating: A+++ (most efficient).
Water Consumption: ~49 liters per cycle (Cotton 60°C).
Spin Speed: Up to 1400 RPM (adjustable).
Noise Level: 53 dB (washing), 73 dB (spinning).
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 230-240V, 50Hz, 10A.
Programs: Cotton, Synthetic, Delicates, Wool, Anti-Allergy, Quick 15’, Drum Clean, etc.
Special Features: Steam Refresh, Delay Start, Child Lock, AquaStop.

Controls and Settings

Control Panel: Program Dial, Digital Display, Temperature Button, Spin Button, Start/Pause, Option Buttons.

Program Dial: Select from 15+ programs (Cotton, Synthetic, Delicates, Wool, etc.). Temperature: Adjust from Cold to 90°C. Spin Speed: Adjust from No Spin to 1400 RPM. Options: Extra Rinse, Pre-Wash, Delay Start (1-24h), Steam Refresh. Child Lock: Press and hold “Start/Pause” + “Delay Start” for 3 seconds. Display: Shows time remaining, selected options, error codes.

Connecting Utilities

Water Inlet: Cold fill only (hot fill not recommended). Drain: Standpipe or sink.

Turn off water tap before connecting hose.
Use only provided hoses; do not extend or repair.
Ensure drain hose is not kinked and is secured.
Plug into dedicated grounded socket; do not use extension cords.

Tip: Check for leaks after first connection by running a short cycle.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by color, fabric type, and care labels.
Load drum: Do not overload; leave space at top.
Add detergent: Use powder/liquid in appropriate compartment.
Select program: Turn dial (e.g., Cotton for everyday items).
Adjust settings: Temperature, spin speed, options as needed.
Start: Press “Start/Pause”; door locks automatically.
Pause/Add: Press “Start/Pause” to stop; wait 2 minutes to add items.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature cycles. Unplug for maintenance.

Special Functions

Steam Refresh: Run without detergent to reduce wrinkles/odors (20 min). Anti-Allergy: Heats to 60°C+ to eliminate allergens. Delay Start: Set start time (1-24h). Child Lock: Locks controls during cycle.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run “Drum Clean” every 30 cycles.

CAUTION! Do not use abrasive cleaners or solvents. Clean filter every 3 months.

Regulatory Information

CE compliant; meets EU Ecodesign and Energy Label regulations. Waste disposal per WEEE directive. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.it or contact 800-132-245 (Italy).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won’t start	Power/child lock	Check plug/power; ensure child lock is off; close door firmly.
No water intake	Tap/hose/kink	Ensure tap is on; check hose for kinks; clean inlet filter.
Water doesn’t drain	Drain hose/filter	Check hose for kinks/blockage; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute load.
Error code on display	Various faults	Consult manual for code meaning; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 800-132-245 (Italy); www.hotpoint.it