Hotpoint washing machine NF1046WK IT manual

The Hotpoint NF1046WK IT is a freestanding washing machine with a 10 kg load capacity, energy efficiency class A+++, 1400 rpm spin speed, and multiple wash programs. It features a digital display, delay timer, child lock, anti-flood protection, and anti-vibration system. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water and Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Load capacity	10 kg maximum load for laundry
Energy class	A+++ for high energy efficiency
Spin speed	Up to 1400 rpm for effective drying
Digital display	Shows time, program, and settings
Delay timer	Delay start up to 24 hours
Child lock	Prevents accidental program changes
Anti-flood protection	Leak detection system
Anti-vibration system	Reduces noise and movement
Quick wash	30-minute program for small loads
Allergy care	Extra rinse cycle for sensitive skin

Installation

Unpack and inspect contents. Place on level, stable floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water inlet: Attach hoses to cold water tap; ensure washers are fitted.
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Power on machine: Press POWER button; display lights up.
Select program: Turn program dial to "Cotton 90°C".
Add detergent: Pour 100 ml of detergent into drum (not dispenser).
Start cycle: Press START/PAUSE; let cycle complete without laundry.
Set language: If applicable, use settings menu to select language.

CAUTION! Remove all packaging materials and transit bolts before use.

Specifications

Model: NF1046WK IT
Capacity: 10 kg
Energy rating: A+++
Spin speed: 1400 rpm
Water pressure: 0.5–10 bar
Programs: 16 programs including Cotton, Synthetic, Delicate, Wool, Quick Wash
Dimensions (HxWxD): 85 x 60 x 60 cm
Power supply: 220–240 V, 50 Hz
Noise level: 65 dB (washing), 75 dB (spinning)

Controls and Settings

Control panel: POWER button, program dial, display, START/PAUSE, option buttons (Delay, Spin Speed, Temperature).

Program dial: Select from Cotton, Synthetic, Delicate, Wool, Quick Wash, Sport, Jeans, Anti-allergy, Rinse+Spin, Drain.

Options: Adjust temperature (cold to 90°C), spin speed (0–1400 rpm), delay (1–24 hours). Display shows time remaining, selected options, and error codes. Child lock: Press and hold DELAY and SPIN SPEED for 3 seconds to activate/deactivate.

Connecting Water and Drain

Water inlet: Connect hoses to cold water tap (blue marker). Drain: Place hose into standpipe (max height 100 cm) or sink.

Ensure water tap is off before connecting hoses.
Use only supplied hoses; do not reuse old hoses.
Secure drain hose to prevent slipping.
Check for leaks after first connection.

Tip: Leave a small gap between drain hose and standpipe to prevent siphoning.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load items loosely; do not overload.
Add detergent: Use dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn dial to desired program.
Adjust options: Set temperature, spin speed, delay if needed.
Start: Press START/PAUSE; display shows time remaining.
Pause: Press START/PAUSE to pause; door locks during wash.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature washes; risk of scalding.

Special Functions

Delay start: Press DELAY button to set start time (1–24 hours). Child lock: Prevents changes during cycle. Extra rinse: Adds rinse cycle for sensitive skin. Speed wash: Reduces time for lightly soiled loads.

Care & Cleaning

Monthly maintenance: Run "Drum Clean" program or hot wash without laundry. Clean detergent dispenser: Remove and rinse under water. Wipe door seal: Remove lint and debris; dry after cleaning.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on surfaces.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Disposal: Follow local regulations for electrical waste. For support, visit www.hotpoint.eu or contact 0333 305 1254 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug and power; ensure door is closed properly.
No water intake	Tap/hose	Ensure water tap is on; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose/pump	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error code on display	Various faults	Consult manual for code meaning; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0333 305 1254; www.hotpoint.eu