Hotpoint washing machine NDD8636DAUK manual

The Hotpoint NDD8636DAUK is a freestanding 8kg capacity washing machine with an A+++ energy rating, featuring a 1400 rpm spin speed, multiple wash programs including Eco 40-60, Cotton, Synthetics, Delicates, Wool, and Quick Wash, delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8kg drum capacity, LED display, rotary program selector, detergent dispenser, filter access, adjustable feet, water inlet hoses, drain hose.

FeatureDescription
Capacity8kg (dry laundry weight)
Energy RatingA+++ (most efficient)
Spin SpeedUp to 1400 rpm
Programs14 programs including Eco 40-60, Cotton, Quick 15'
DisplayLED with time remaining, cycle stage indicators
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Anti-Flood ProtectionAutomatic water shut-off if leak detected
Detergent DispenserCompartments for pre-wash, main wash, softener
Adjustable FeetFor leveling on uneven floors

Installation

Unpack and remove transit bolts. Place on stable, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if available (red marker).
  3. Connect drain hose: Place in standpipe or sink edge; secure with U-bend.
  4. Level the machine: Adjust feet using wrench; ensure no rocking.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Check installation: Ensure hoses are secure, machine is level.
  2. Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
  3. Set preferences: Use option buttons to select spin speed, temperature, delay start.
  4. Load detergent: Add to appropriate dispenser compartments.

CAUTION! Do not use leaking hoses. Check for kinks in hoses.

Specifications

Controls and Settings

Control panel: Rotary program selector, LED display, option buttons (Start/Pause, Delay, Spin Speed, Temperature, Extra Rinse), child lock button.

Program Selector: Turn to choose wash program (Cotton, Synthetics, Delicates, Wool, Eco 40-60, Quick 15', Drum Clean, etc.).

Options: Adjust spin speed (400-1400 rpm, Rinse Hold), temperature (cold to 90°C), delay start (1-24h), extra rinse. Display: Shows time remaining, cycle stage, error codes. Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (60-100 cm height) or sink.

  1. Ensure taps are off before connecting hoses.
  2. Use only supplied hoses; do not reuse old ones.
  3. Secure drain hose to prevent slipping.
  4. Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 8kg; distribute evenly.
  2. Add detergent: Use compartment II for main wash; I for pre-wash; * for softener.
  3. Select program: Turn selector (e.g., Cotton for cottons, Synthetics for blends).
  4. Adjust options: Set temperature, spin speed, extra rinse if needed.
  5. Start: Press Start/Pause; display shows time remaining.
  6. Pause/change: Press Start/Pause to stop; wait 2 minutes to open door if safe.
  7. End of cycle: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not wash items contaminated with petrol, solvents. Remove coins, keys from pockets.

Special Functions

Delay Start: Set 1-24h delay; machine starts automatically. Child Lock: Locks controls during wash. Anti-Crease: Tumbles intermittently after cycle if door closed. Extra Rinse: Adds rinse for sensitive skin. Rinse Hold: Stops with water in drum for handwashing delicate items.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, filter, run Drum Clean program.

CAUTION! Unplug before cleaning. Wipe exterior with damp cloth; do not use abrasive cleaners. Clean filter every 2 months to prevent blockages.

Regulatory Information

CE marked; complies with EU directives for safety, EMC, energy labeling. Waste disposal: Dispose of packaging and old machine per local regulations. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or contact 0333 305 2265.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed, power issueEnsure door shut firmly; check plug, fuse, power outlet.
No water intakeTaps off, kinked hose, filter blockedOpen taps; straighten hoses; clean inlet filter.
Water not drainingDrain hose blocked/kinked, filter cloggedCheck hose position/blockages; clean pump filter.
Excessive vibration/noiseTransit bolts not removed, uneven load, not levelRemove transit bolts; redistribute laundry; adjust feet.
Error codes (e.g., F01, F05)Fault detectedConsult manual error code list; reset by unplugging for 5 mins.
LeakingLoose hose connections, damaged sealTighten hoses; check door seal for debris/damage.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 2265; www.hotpoint.co.uk

Hotpoint washing machine NDD8636DAUK manual © - All Rights Reserved 2025