Hotpoint washing machine NDD11725BDAEE manual

The Hotpoint NDD11725BDAEE is a freestanding 7kg capacity washing machine with 1200 RPM spin speed, A+++ energy rating, and a range of innovative features including AquaCare technology for garment care, Anti-Stain program for tough stains, Direct Spray for efficient rinsing, and Time Save option for quicker cycles. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, filter, water inlet valves, drain pump, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Position the machine: Ensure at least 1cm space from walls and cabinets.
2. Adjust feet: Use a spanner to level the machine; check with spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
4. Connect drain hose: Place in standpipe or sink edge; secure with provided U-bend.
5. Plug into grounded power outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Remove transit bolts: Use spanner to remove all bolts from rear; fit covers.
2. Check leveling: Adjust feet until machine is stable and does not rock.
3. Connect power and turn on: Press POWER button; display will illuminate.
4. Run initial cycle: Select "Drum Clean" or "Cotton 90°C" program without laundry.
5. Set preferences: Use settings menu to adjust buzzer volume, default spin speed, etc.

CAUTION! Never use the machine without removing transit bolts—this can cause serious damage.

Specifications

• Model: NDD11725BDAEE
• Type: Freestanding front-load washing machine
• Capacity: 7kg
• Max Spin Speed: 1200 RPM
• Energy Class: A+++
• Water Pressure: 0.5 - 10 bar
• Power Supply: 220-240V, 50Hz
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Programs: 15 including Cotton, Synthetics, Delicates, Wool, Anti-Stain, Quick Wash
• Noise Level: Wash: 53 dB, Spin: 75 dB

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR knob, OPTION buttons (Time Save, Extra Rinse, etc.), CHILD LOCK, DISPLAY.

Programs: Cotton (20°C-90°C), Synthetics, Delicates, Wool, Hand Wash, Anti-Stain, Drum Clean, Quick 15', Sport, Jeans, Mix, Outdoor, Silk, Shirts, Rinse & Spin.

Options: Time Save (reduces time), Extra Rinse (adds rinse cycle), Delay Start (1-24h), Pre-Wash (for heavily soiled items), Speed Wash (reduces time on mixed loads). Settings Menu: Buzzer volume, default spin speed, temperature adjustment, child lock activation.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps. Drain: Hose to standpipe or sink.

1. Ensure taps are off before connecting hoses.
2. Use only provided hoses; do not reuse old ones.
3. Secure drain hose at height between 60-100 cm to prevent siphoning.
4. Check for leaks after first connection by running a short rinse cycle.

Tip: Install a drip tray if placing machine on sensitive flooring.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not exceed 7kg; distribute evenly.
2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
3. Select program: Turn knob to desired program.
4. Set options: Press option buttons as needed (e.g., Extra Rinse).
5. Start: Press START/PAUSE; display shows remaining time.
6. Pause/change: Press START/PAUSE to stop; wait for door lock to release (may take 2 mins).
7. End of cycle: Buzzer sounds; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during wash or spin; wait for door lock symbol to disappear.

Special Functions

Anti-Stain: Select program; machine automatically adjusts temperature and time for stains like grass, wine, grease. AquaCare: Gentle drum movement for delicate fabrics. Direct Spray: Continuous water spray during rinse for better detergent removal. Time Save: Reduces cycle time by optimizing wash and rinse phases.

Care & Cleaning

Regular maintenance ensures performance and longevity.

1. Clean detergent drawer: Pull out, rinse under tap, dry and reinsert.
2. Clean door seal: Wipe rubber gasket to remove lint and residue; leave door ajar after use.
3. Clean filter: Locate at bottom front; place towel, open cap, drain residual water, remove debris.
4. Run Drum Clean monthly: Use dedicated program or 90°C cotton cycle without laundry.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Labeling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.eu or contact Hotpoint Customer Care at 0800 316 1444 (UK).

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 0800 316 1444; www.hotpoint.eu