Hotpoint washing machine NDD 9725 BDA UK manual

The Hotpoint NDD 9725 BDA is a 9kg capacity freestanding washing machine with a 1200 RPM spin speed, featuring Hotpoint's Anti-Stain technology, Direct Spray jet system for efficient rinsing, and a wide range of programmes including a 15-minute fast wash. It is A+++ rated for energy efficiency and designed for UK households. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 9kg drum, LED display, programme selector knob, detergent dispenser, filter access, adjustable feet, water inlet hoses, drain hose.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove four bolts at rear; keep bolts for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure washers are fitted.
3. Connect drain hose: Place hose into standpipe or sink; use hook if provided.
4. Level the machine: Adjust the four feet using a spanner until machine is stable.
5. Plug into a grounded 220-240V AC power outlet.

WARNING! Do not install in areas prone to freezing. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Ensure machine is installed correctly and plugged in.
2. Turn on water taps fully.
3. Open detergent dispenser and pour 1/2 litre of white vinegar into the drum to remove manufacturing residues.
4. Select the "Drum Clean" programme or a 90° cotton cycle without laundry.
5. Press Start/Pause. Allow cycle to complete.
6. After cycle, leave door open to air dry.

CAUTION! Never use the machine with transit bolts in place. Always level the appliance to prevent excessive vibration.

Specifications

• Model: NDD 9725 BDA UK
• Capacity: 9kg
• Spin Speed: 1200 RPM (adjustable)
• Energy Rating: A+++
• Water Consumption: Approx. 52 litres per cycle (cotton 60°)
• Noise Level: Washing: 53 dB; Spinning: 73 dB
• Programmes: Cotton, Synthetic, Delicate, Wool, Anti-Stain, Fast 15', Sport, Drum Clean, etc.
• Dimensions (HxWxD): 85cm x 60cm x 60cm
• Power Supply: 220-240V AC, 50Hz
• Weight: 70kg

Controls and Settings

Access settings via the control panel. Programme Selector Knob: Turn to choose desired programme. LED Display: Shows time, options, and status.

Buttons: Start/Pause, Delay Start, Extra Rinse, Anti-Crease, Spin Speed Reduction, Temperature Selection, Child Lock.

Programme Options: Each programme has default temperature and spin speed, which can be modified using Temp and Spin buttons. Delay Start: Press to delay start (1-24 hours). Child Lock: Press and hold Start/Pause and Delay Start for 3 seconds to activate/deactivate. Detergent Dispenser: Drawer with compartments I (pre-wash), II (main wash), * (fabric softener).

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps. Drain: Hose can be placed in standpipe (min 60cm, max 100cm height) or sink.

1. Ensure water taps are off before connecting hoses.
2. Use only supplied hoses; do not reuse old ones.
3. Secure drain hose using the U-bend hook to prevent slipping.
4. Check for leaks after first connection by turning taps on briefly.

Tip: The drain hose should not be pushed more than 15cm into the standpipe to avoid siphoning.

Using Programmes

Supports various fabrics and soil levels.

1. Sort laundry by colour and fabric type.
2. Load machine: Do not overload; distribute items evenly.
3. Add detergent: Pour into correct compartment (II for main wash). Use recommended amount.
4. Select programme: Turn knob (e.g., Cotton 40°).
5. Adjust options: Press Temp, Spin, Extra Rinse, etc., as needed.
6. Press Start/Pause. The door locks and cycle begins.
7. At end of cycle, "End" appears. Door unlocks after a short delay.
8. Remove laundry promptly. Leave door ajar to dry drum.

WARNING! Do not open door during cycle (hot water risk). Check pockets for objects. Use only HE (High Efficiency) detergent.

Care & Maintenance

Regular care ensures longevity and performance.

• Cleaning Dispenser: Pull out drawer, rinse under tap, clean compartment with soft brush.
• Cleaning Filter: Turn off and unplug machine. Open filter cover at front bottom right. Place towel, unscrew filter slowly to drain residual water. Clean filter and housing. Re-tighten.
• Cleaning Drum: Run Drum Clean programme monthly or use proprietary cleaner.
• Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Always disconnect power before cleaning filter. Never run machine without filter.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically locks during wash cycle. Overflow Protection: Shuts off water if detected. Imbalance Detection: Reduces spin speed or stops if load is uneven. Thermal Cut-out: Prevents overheating.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016. CE marked. Manufactured for the UK market. This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). Do not dispose of with household waste. For disposal information, contact your local authority. For support, visit www.hotpoint.co.uk or contact 03448 225 225.

Troubleshooting

Reset: Unplug machine for 1 minute, then reconnect.

Service: 03448 225 225; www.hotpoint.co.uk. Do not attempt repairs yourself.