Hotpoint washing machine NDD 8636 BDA UK manual

The Hotpoint NDD 8636 BDA UK is a freestanding 8kg capacity washing machine with an A+++ energy rating, featuring a 1400 rpm spin speed, multiple wash programmes including Eco 40-60, Quick Wash, and Delicates, a delay timer up to 24 hours, and child lock safety feature. It includes a digital display, rotary programme selector, and is designed for UK 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8kg drum capacity, Digital display, Programme selector knob, Detergent drawer, Water inlet hoses, Drain hose, Power cord, Levelling feet.

Feature	Description
Capacity	8kg (dry laundry weight)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
Digital Display	Shows time remaining, programme, and status
Programme Selector	Rotary knob for selecting wash cycles
Delay Timer	Delay start up to 24 hours
Child Lock	Locks controls to prevent accidental changes
Detergent Drawer	Compartments for pre-wash, main wash, and fabric softener
Quick Wash	30-minute cycle for lightly soiled loads
Eco 40-60	Energy-efficient programme for 40°C and 60°C washes

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue mark) and machine inlet.
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Level the machine: Adjust front feet to ensure machine is stable.
Plug into power socket.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in machine; follow initial setup steps.

Run a test wash: Select Cotton 90°C programme without laundry to clean drum.
Set language: Default is English; adjust via settings if applicable.
Adjust spin speed: Use SPIN SPEED button to select desired rpm.
Set delay start: Press DELAY START to programme start time.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: NDD 8636 BDA UK
Capacity: 8kg
Energy Rating: A+++
Spin Speed: 1400 rpm (adjustable)
Water Pressure: 0.5 - 8 bar
Programmes: Cotton, Synthetics, Delicates, Wool, Quick Wash, Eco 40-60, etc.
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Noise Level: 74 dB (washing), 78 dB (spinning)

Controls and Settings

Access controls via front panel. Programme Selector: Turn knob to choose wash cycle. Buttons: START/PAUSE, SPIN SPEED, TEMPERATURE, DELAY START, CHILD LOCK.

Display: Shows programme time, spin speed, temperature, delay time, and error codes.

Settings: Adjust temperature (cold to 90°C), spin speed (0 to 1400 rpm), delay start (1-24 hours). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water tap. Drain: Place hose in standpipe (max height 100 cm).

Turn off water tap before connecting hoses.
Ensure hose connections are hand-tight; avoid over-tightening.
Check drain hose is not kinked or blocked.

Tip: Use hose clips provided to secure connections and prevent leaks.

Using Wash Programmes

Supports various fabrics and soil levels.

Load laundry: Open door, load items evenly, close door firmly.
Add detergent: Pour into correct drawer compartment (I: pre-wash, II: main wash, III: softener).
Select programme: Turn knob to desired cycle (e.g., Cotton, Synthetics).
Adjust settings: Press TEMPERATURE or SPIN SPEED to modify.
Start: Press START/PAUSE; display shows time remaining.
Pause/stop: Press START/PAUSE to pause; turn knob to reset to stop.
After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not overload drum; max 8kg dry weight. Use only HE (High Efficiency) detergent.

Safety Features

Child Lock: Locks controls to prevent tampering. Door Lock: Automatically locks during wash; unlocks at end. Overflow Protection: Shuts off water if detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean programme every 30 washes.

CAUTION! Do not use abrasive cleaners or solvents; keep control panel dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug is in socket; ensure door is closed properly.
No water intake	Taps/hoses	Ensure water taps are on; check hoses for kinks.
Excessive vibration	Transit bolts/level	Ensure transit bolts removed; adjust levelling feet.
Water not draining	Drain hose	Check hose for blockages; ensure height is below 100 cm.
Error code on display	Various faults	Consult manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk