Hotpoint washing machine NDBR 984469 WA manual

The Hotpoint NDBR 984469 WA is a freestanding washing machine with a 9kg capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1400 rpm, delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn to level machine; use spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
4. Connect drain hose: Place in standpipe or sink hook; secure at 60-100 cm height.
5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and power on the machine; run a maintenance wash.

1. Initial run: Select Cotton program at 90°C without laundry to clean drum.
2. Set language: Press and hold two buttons (e.g., Start + Delay) to cycle languages.
3. Test programs: Run a quick cycle to ensure proper water inlet and drainage.
4. Adjust settings: Use control dial and buttons to explore programs.

CAUTION! Ensure all hoses are securely connected and not kinked before first use.

Specifications

• Model: NDBR 984469 WA
• Capacity: 9 kg
• Spin Speed: 1400 rpm (adjustable)
• Energy Consumption: 0.95 kWh per cycle (Cotton 60°C)
• Water Consumption: Approx. 52 liters per cycle (Cotton 60°C)
• Noise Level: Washing: 53 dB; Spinning: 73 dB
• Programs: Cotton, Eco Cotton, Synthetics, Delicates, Wool, Hand Wash, Quick 15', Sport, Jeans, Anti-Allergy, Drum Clean, Spin, Rinse & Spin
• Special Functions: Delay Start, Extra Rinse, Pre-Wash, Speed Wash, Child Lock
• Power Supply: 220-240V, 50Hz, 10A
• Weight: 68 kg

Controls and Settings

Control Panel: Program dial, Start/Pause button, Delay button, Option buttons (Extra Rinse, Pre-Wash, etc.), Display with icons.

Using Controls: Turn dial to select program. Press options as needed. Set delay with Delay button. Press Start/Pause to begin or pause cycle.

Program Details: Each program shows default temperature, spin speed, and duration on display. Adjust temperature (cold to 90°C) and spin speed (0 to 1400 rpm) with corresponding buttons.

Child Lock: Press and hold Delay + Start for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if used). Ensure filters are clean. Drain: Place hose in standpipe or over sink edge; maximum height 100 cm.

1. Turn off taps before connecting hoses.
2. Check for leaks after connections.
3. Ensure drain hose is not submerged to prevent siphoning.

Tip: Use only provided hoses; do not extend or replace with non-genuine parts.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not exceed 9 kg; distribute evenly.
2. Add detergent: Pour into drawer compartment II (main wash) or I (pre-wash).
3. Select program: Turn dial (e.g., Cotton for linens).
4. Adjust settings: Change temperature, spin speed if needed.
5. Start: Press Start/Pause; door locks automatically.
6. After cycle: Wait for door lock symbol to disappear before opening.
7. Unload: Remove laundry promptly to avoid wrinkles.

WARNING! Do not wash items soaked in flammable liquids. Remove coins, keys from pockets.

Special Functions

Delay Start: Press Delay button to set start time (up to 24 hours). Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled loads. Speed Wash: Reduces time for lightly soiled loads. Child Lock: Locks controls during operation.

Care & Cleaning

Regular maintenance ensures longevity.

1. Clean detergent drawer: Remove and rinse under water monthly.
2. Clean drum: Run Drum Clean program every 30 cycles or use washing machine cleaner.
3. Clean filter: Locate at front bottom; place towel, open cap, drain water, remove debris.
4. Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Do not use steam or high-pressure cleaners.

Regulatory Information

Complies with EU directives for safety (EN 60335), electromagnetic compatibility (EN 55014), and energy labeling (EU 2019/2014). CE marked. Manufactured for the EU market. For support, visit www.hotpoint.eu or contact local service center. Disposal: Follow WEEE regulations; do not dispose with household waste.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service: www.hotpoint.eu/service