Hotpoint washing machine NDB 964489 WDA manual

The Hotpoint NDB 964489 WDA is a freestanding washing machine with a 9kg capacity, featuring multiple wash programs, energy-efficient operation, a digital display, delay start, child lock, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	9kg drum capacity for large loads
Digital Display	Shows time, program, and status
Wash Programs	Multiple programs for different fabrics
Energy Rating	High energy efficiency class
Delay Start	Set wash cycle to start later
Child Lock	Prevents accidental program changes
Spin Speed Control	Adjustable spin speed up to 1400 rpm
Quick Wash	Fast cycle for lightly soiled items
Detergent Dispenser	Compartments for pre-wash, main wash, and softener
Door Lock	Automatic door lock during operation

Installation

Unpack and inspect contents. Place on level, stable floor.

Remove transit bolts: Use spanner to remove bolts from rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust front feet to ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Power on machine: Plug in and press power button.
Run empty wash: Select a hot wash program (e.g., Cotton 90°C) without laundry to clean drum.
Set preferences: Use control dial and buttons to set language, time, etc.
Load detergent: Fill dispenser compartments as needed for your wash.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: NDB 964489 WDA
Capacity: 9kg
Energy Class: A+++
Max Spin Speed: 1400 rpm
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, etc.
Water Pressure: 0.5 - 10 bar
Power Supply: 220-240V, 50Hz
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 70kg

Controls and Settings

Control Panel: Power button, program dial, start/pause, delay start, spin speed, temperature, and option buttons.

Program Dial: Select from Cotton, Synthetic, Delicate, Wool, Quick Wash (15/30 min), Sport, Jeans, Anti-Allergy, Rinse & Spin, Drain.

Options: Pre-wash, Extra rinse, Eco, Silent, Delay start (1-24h), Child lock (press and hold for 3 seconds). Settings: Adjust spin speed (400-1400 rpm or no spin), temperature (cold to 90°C). Display: Shows time remaining, program, and selected options.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if used). Drain: Place hose in standpipe (max height 100cm) or sink.

Turn off taps before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Ensure drain hose is not kinked and is securely placed.
Check for leaks after first connection.

Tip: Use hose clips if provided for secure connection.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Open dispenser drawer; add to correct compartments.
Select program: Turn dial to desired program.
Adjust settings: Set temperature, spin speed, and options if needed.
Start: Press start/pause button; door locks automatically.
Pause/change: Press start/pause to stop; wait for door unlock signal.
End of cycle: Machine beeps; door unlocks after a short time.

WARNING! Do not open door during wash; wait for unlock indicator. Remove items promptly to avoid wrinkles.

Care & Maintenance

Clean detergent dispenser monthly: Remove drawer and rinse under water. Clean drum: Run hot wash cycle without laundry monthly. Check filter: Clean drain pump filter every 3 months (see troubleshooting). Wipe exterior with damp cloth; unplug first.

CAUTION! Do not use abrasive cleaners; keep area around machine dry.

Safety Information

Always unplug before cleaning or maintenance. Keep children away from machine when in use. Use only recommended detergents. Do not wash items soiled with flammable substances.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Copyright © Hotpoint. For support, visit www.hotpoint.eu or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power outlet; press start.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Machine vibrates	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Water not draining	Drain hose/filter blocked	Check hose for kinks; clean drain pump filter.
Error code on display	Various faults	Consult manual for code meaning; reset by unplugging for 1 min.

Reset: Unplug for 1 minute to reset electronic control.

Service: Contact authorized Hotpoint service center; do not attempt repairs yourself.