Hotpoint washing machine NDB 96443 W IT N manual

The Hotpoint NDB 96443 W IT N is a freestanding washing machine with a 9 kg load capacity, featuring an A+++ energy rating, 1400 rpm spin speed, and multiple wash programs. It includes Hotpoint's Anti-Stain technology, Direct Spray for efficient rinsing, a delay timer, and a large LED display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent dispenser, drum, filter, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	9 kg (cotton)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
Anti-Stain Technology	Automatic stain removal for common stains
Direct Spray	Continuous water spray during rinse for better detergent removal
Programs	15 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours
LED Display	Shows time remaining, cycle stage, and settings
Child Lock	Prevents accidental program changes
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on solid, level floor near water and drain points.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep bolts for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if available (red marker).
Connect drain hose: Place in standpipe (min 60 cm height) or hook over sink edge.
Level the machine: Adjust feet using wrench; use spirit level to check.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a cotton cycle at 90°C without laundry to clean the drum.

Add detergent: Pour 100 ml of detergent into drum or dispenser.
Select program: Turn knob to "Cotton 90°C".
Start: Press Start/Pause. Let cycle complete.
Set preferences: Use Settings button to adjust buzzer volume, etc.

CAUTION! Ensure hoses are securely connected and not kinked. Check for leaks during first fill.

Specifications

Model: NDB 96443 W IT N
Capacity: 9 kg (cotton)
Energy Class: A+++
Annual Energy Consumption: 175 kWh
Water Consumption: 10,200 litres/year
Spin Speed: 1400 rpm
Noise Level (wash/spin): 53/76 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 70 kg
Voltage: 220-240 V, 50 Hz
Max Power: 2100 W

Controls and Settings

Control Panel: Program knob, LED display, Start/Pause, Option buttons (Delay, Extra Rinse, etc.), Settings button.

Programs: Cotton (20°C-90°C), Synthetic, Delicate, Wool, Silk, Quick Wash (30 min), Sport, Jeans, Anti-Stain, Drum Clean.

Options: Delay (1-24h), Extra Rinse, Reduced Creases, Speed Wash, Prewash.

Settings Menu: Press Settings button to adjust end-of-cycle buzzer (3 levels), child lock (press 3 sec), reset to factory defaults.

Connecting Water & Drain

Water Inlet: Two hoses (blue for cold, red for hot). Drain: Hose with U-shaped end.

Turn off water taps before connecting hoses.
Screw hoses onto taps; hand-tighten plus half turn with pliers.
Place drain hose in standpipe (60-100 cm height) or over sink edge (secure with hook).
Ensure no kinks in hoses.

Tip: Use only supplied hoses; replace every 5 years. Do not extend drain hose beyond 150 cm.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Use dispenser compartments I (prewash), II (main wash), * (softener).
Select program: Turn knob to desired program.
Set options: Press Delay, Extra Rinse, etc. as needed.
Start: Press Start/Pause. LED shows time remaining.
Pause/change: Press Start/Pause to pause; turn knob to change program (drum must be stopped).
End of cycle: Door locks until "End" appears; unlock with door handle.

WARNING! Do not open door during high-temperature washes; wait for cool-down.

Special Functions

Anti-Stain: Select Anti-Stain program; machine detects stain type and adjusts cycle. Direct Spray: Automatically active on rinse cycles for efficient rinsing. Drum Clean: Run monthly with detergent to prevent odors.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly: pull out, rinse under tap. Clean filter every 2 months: open flap at bottom front, place bowl, unscrew filter cap, clean debris. Clean drum with Drum Clean program monthly.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Label regulations. Disposal: At end of life, dispose at designated recycling center. For support, visit www.hotpoint.com or contact 0333 305 1254 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power; ensure child lock is off.
No water intake	Taps off/hoses blocked	Open taps; check hose filters for debris; straighten kinks.
Water not draining	Drain hose blocked/filter	Check drain hose for kinks; clean pump filter.
Excessive vibration/noise	Transit bolts not removed/uneven floor	Remove all 4 transit bolts; re-level machine.
Error codes (e.g., F01)	Various faults	Unplug for 5 minutes, replug. If persists, note code and call service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0333 305 1254; www.hotpoint.com