Hotpoint washing machine NDB 9636 DA IT manual

The Hotpoint NDB 9636 DA IT is a freestanding washing machine with a 9 kg load capacity, energy efficiency class A+++, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, Direct Spray for efficient rinsing, a delay timer, and a large LED display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	9 kg maximum load
Energy Class	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Anti-Stain Technology	Automatic treatment for common stains
Direct Spray	Efficient rinsing system
Programs	16 wash programs including Cotton, Synthetic, Delicates, Quick Wash
Delay Timer	Up to 24 hours
LED Display	Shows time remaining, program, and options
Child Lock	Prevents accidental program changes
Door Lock	Automatic during cycle

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap (3/4" thread). Ensure washers are fitted.
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Level the machine: Adjust front feet to ensure machine is stable and does not vibrate.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a cotton cycle at 90°C without laundry to clean the drum.

Power on: Press POWER button; LED display will light up.
Select language: Press SETTINGS button to choose display language (default: Italian).
Load detergent: Add powder/liquid to appropriate dispenser compartments.
Choose program: Turn program selector to desired wash cycle.
Start cycle: Press START/PAUSE button.

CAUTION! Ensure transit bolts are removed. Do not overload the machine.

Specifications

Model: NDB 9636 DA IT
Capacity: 9 kg
Energy Rating: A+++
Water Consumption: Approx. 52 litres per cycle (cotton 60°C)
Spin Speed: 1400 RPM (adjustable)
Noise Level: Washing: 53 dB; Spinning: 73 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 70 kg
Power Supply: 230-240V, 50Hz
Programs: 16 including Cotton, Eco Cotton, Synthetic, Delicates, Wool, Sport, Quick 15', Anti-Stain

Controls and Settings

Control Panel: POWER button, Program selector knob, Temperature button, Spin speed button, Delay Timer button, Options buttons (Extra Rinse, Prewash, etc.), START/PAUSE button.

Program Selection: Turn knob to choose program (symbols shown on display). Temperature: Press TEMP button to select (Cold, 30°C, 40°C, 60°C, 90°C). Spin Speed: Press SPIN button to select (RPM: 400, 600, 800, 1000, 1200, 1400, or No Spin). Delay Timer: Press DELAY to set start time (1-24 hours). Options: Select Extra Rinse, Prewash, etc. as needed. Child Lock: Press and hold TEMP + SPIN for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Cold water only (hose supplied). Drain: Hose can be placed in sink or standpipe (max height 100 cm).

Ensure water tap is off before connecting hose.
Connect inlet hose to machine (right rear) and to cold water tap.
Open tap fully and check for leaks.
Place drain hose securely; avoid kinks.

Tip: Use hose clips if drain hose is placed in standpipe to prevent slipping.

Using Wash Programs

Select program based on fabric type and soil level.

Sort laundry: Separate by colour and fabric type.
Load machine: Do not exceed 9 kg; distribute evenly.
Add detergent: Use compartment I (prewash), II (main wash), * (softener).
Select program: Turn knob (e.g., Cotton for cottons).
Adjust temperature/spin: Use TEMP/SPIN buttons.
Add options: Press Extra Rinse if needed.
Start: Press START/PAUSE; door locks automatically.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during cycle; hot water may cause burns. Wait for door lock light to go off.

Special Functions

Anti-Stain: Automatically selects optimal time/temperature for common stains (wine, grass, etc.). Direct Spray: Improves rinse efficiency. Delay Timer: Start wash later (e.g., at night). Child Lock: Locks control panel. Quick 15': Fast wash for lightly soiled items.

Care & Cleaning

Regularly clean detergent dispenser, drum, and door seal. Run maintenance cycle monthly (90°C cotton without laundry).

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on door or control panel.

Regulatory Information

Complies with EU directives for safety, EMC, and energy labelling. CE marked. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service centre.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug; ensure door is closed properly; press START/PAUSE.
No water intake	Tap/hose	Ensure tap is open; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check hose for kinks; clean pump filter.
Excessive vibration/noise	Transit bolts/load	Ensure transit bolts removed; level feet; redistribute load.
Detergent not dispensed	Dispenser clogged	Clean detergent dispenser drawer.
Error codes on display	Various faults	Refer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorised Hotpoint service centre. Do not attempt repairs yourself.