Hotpoint washing machine NDB 9635 W UK manual

The Hotpoint NDB 9635 W is a freestanding 9kg capacity washing machine with an A+++ energy rating, 1400 rpm spin speed, and multiple wash programmes including Cotton, Synthetic, Delicates, Wool, and Quick Wash. It features a large LED display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 9kg drum, LED control panel, detergent dispenser, water inlet valves, drain pump, and adjustable feet.

Installation

Unpack and remove transit bolts. Place on solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (blue connector) and hot if applicable (red).
3. Connect drain hose: Place in standpipe or sink edge; secure with U-bend.
4. Level the machine: Adjust front feet using spanner; check with spirit level.
5. Plug into grounded 220-240V AC power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Power on machine: Press POWER button.
2. Run empty drum clean: Select "Drum Clean" programme (if available) or a 90°C cotton cycle without laundry.
3. Set water hardness: Consult manual and adjust via settings if applicable.
4. Load detergent: Fill detergent drawer compartments as per instructions.
5. Select programme: Choose appropriate cycle for your laundry type.

CAUTION! Ensure packaging materials are fully removed before use.

Specifications

• Model: NDB 9635 W UK
• Colour: White
• Capacity: 9kg
• Dimensions (HxWxD): 85cm x 60cm x 60cm
• Energy Rating: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: 10,000 litres per year
• Spin Speed: 1400 rpm
• Noise Level (Wash/Spin): 53 dB / 75 dB
• Voltage: 220-240V ~ 50Hz
• Max Load Power: 2300 W
• Programmes: 15 including Cotton, Synthetic, Delicates, Wool, Quick Wash, Sport, Jeans

Controls and Settings

Control Panel: POWER button, Programme selector knob, LED display, option buttons (Delay Start, Extra Rinse, Pre-wash, Speed Perfect), Start/Pause button.

Programme Selection: Turn knob to desired programme. Display shows duration and options.

Options: Delay Start (1-24h), Extra Rinse (adds rinse cycle), Pre-wash (for heavily soiled items), Speed Perfect (reduces cycle time).

Temperature Selection: Adjustable on most programmes from cold to 90°C.

Spin Speed Selection: Adjustable or can be set to no spin (Rinse Hold).

Child Lock: Press and hold Delay Start and Extra Rinse for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Use only supplied hoses. Drain: Place hose in standpipe (height 60-100cm) or over sink edge.

1. Ensure taps are off before connecting hoses.
2. Check hose seals are intact and connections are tight.
3. After connection, open taps fully and check for leaks.
4. Ensure drain hose is not kinked and is securely placed.

Tip: Use drain hose extension if needed; do not submerge hose in water.

Using Wash Programmes

Select programme based on fabric type and soil level.

1. Load laundry: Do not exceed 9kg; distribute evenly.
2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
3. Select programme: Turn knob (e.g., Cotton 40°C for mixed colours).
4. Set options: Press desired option buttons (LED lights up).
5. Start: Press Start/Pause; door locks and cycle begins.
6. Pause/Modify: Press Start/Pause to pause; can add items within first few minutes.
7. End of cycle: Signal sounds; door unlocks after short delay.

WARNING! Do not open door during high temperature washes; wait for unlock signal.

Special Functions

Delay Start: Set wash to begin later (1-24h). Extra Rinse: Adds rinse for sensitive skin. Pre-wash: For heavily soiled items. Speed Perfect: Reduces cycle time by up to 65%. Child Lock: Prevents accidental button presses. Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles.

Care & Cleaning

Regular maintenance ensures optimal performance.

1. Clean detergent drawer: Pull out, rinse under tap, dry and replace.
2. Clean door seal: Wipe rubber gasket to remove lint and residue; leave door ajar after use.
3. Clean filter: Locate at front bottom right; place towel, open slowly, clean debris.
4. Run drum clean: Monthly, use proprietary cleaner or 90°C cotton cycle without laundry.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on surfaces.

Regulatory Information

CE marked. Complies with EU directives for low voltage, EMC, and eco-design. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk