Hotpoint Washing Machine NDB 8636 WA IT Manual

The Hotpoint NDB 8636 WA IT is a freestanding washing machine with a 6kg capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1200 rpm, delay timer, child lock, and anti-flood protection. Designed for standard 230V~50Hz power supply. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Position the machine: Ensure at least 1 cm clearance from walls/cabinets.
2. Adjust feet: Use a spanner to level the machine; check with spirit level.
3. Connect water supply: Attach inlet hose to cold water tap (3/4" thread). Ensure washers are fitted.
4. Connect drain hose: Place in standpipe (min height 60 cm, max 100 cm) or hook over sink edge.
5. Plug into grounded power socket: Do not use adapters or extension cords.

WARNING! Remove all four transit bolts from the rear before first use. Failure to do so will cause severe damage.

First-Time Setup

After installation, run an empty maintenance wash.

1. Turn on water tap fully.
2. Plug in power cord and press the ON/OFF button.
3. Select the "Cotton" program at 90°C without laundry.
4. Add 1/2 cup of detergent to drum (not dispenser).
5. Press START/PAUSE to begin. This cleans the drum and removes residues.
6. Set language (if applicable): Press and hold PROGRAM and OPTION buttons for 3 seconds to toggle language on display.

CAUTION! Ensure the machine is perfectly level to prevent excessive vibration and noise.

Specifications

• Model: NDB 8636 WA IT
• Capacity: 6 kg
• Energy Rating: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: 45 litres per cycle (Cotton 60°C)
• Spin Speed: 1200 rpm (adjustable)
• Noise Level (Wash/Spin): 56/76 dB(A)
• Programs: 14 + 4 special functions
• Power Supply: 230V~, 50Hz, 10A max
• Dimensions (HxWxD): 850 x 600 x 540 mm
• Weight: 68 kg

Controls and Settings

Control Panel: ON/OFF button, PROGRAM selector knob, OPTION buttons (e.g., Extra Rinse, Pre-Wash), TEMPERATURE button, SPIN SPEED button, DELAY START button, and START/PAUSE button.

Program Knob: Select from Cotton, Synthetics, Delicates, Wool, Silk, Jeans, Sportswear, Quick Wash (30'), Daily (59'), Eco 40-60, Rinse & Spin, Drain, Spin Only, Drum Clean.

Options: Pre-Wash (for heavily soiled), Extra Rinse (for sensitive skin), Night Mode (reduces spin noise), Speed Wash (reduces time).

Settings: Adjust temperature (Cold to 90°C), spin speed (0 to 1200 rpm), delay start (1-24h). Child Lock: Press and hold TEMPERATURE and SPIN SPEED for 3 seconds.

Connecting Water & Drain

Water Inlet: Connect only to cold water supply (max pressure 1 MPa, min 0.05 MPa). Use new hose supplied; do not reuse old hoses.

1. Ensure tap is off. Screw hose onto tap hand-tight, then tighten a further 2/3 turn with pliers.
2. Connect other end to machine inlet valve (marked with blue ring).
3. Drain hose: Insert into standpipe (diameter min 4 cm) at height 60-100 cm from floor, or secure over sink edge with U-bend hook.
4. Check for leaks: Turn on tap and inspect connections before first wash.

Tip: Do not kink or crush hoses. Ensure drain hose is not submerged in water.

Using Wash Programs

Select program based on fabric type and soil level.

1. Sort laundry: Separate by colour, fabric, and care labels.
2. Load drum: Do not exceed 6 kg. Distribute evenly.
3. Add detergent: Pour powder/liquid into appropriate dispenser compartment (I=pre-wash, II=main wash, * = softener). Use HE (High Efficiency) detergent.
4. Close door firmly until click.
5. Select program with knob.
6. Adjust options (temperature, spin, extra rinse) as desired.
7. Press START/PAUSE. The display will show remaining time.
8. At cycle end, "End" appears. Door unlocks after a few minutes. Remove laundry promptly.

WARNING! Do not wash waterproof items (e.g., raincoats, bath mats) as they may cause imbalance and damage.

Special Functions

Delay Start: Set delay (1-24h) before pressing START. Useful for off-peak energy times.

Child Lock: Activates during wash to prevent program changes. Press and hold TEMPERATURE and SPIN SPEED for 3 seconds. Deactivate with same button combination.

Pause/Add Laundry: Press START/PAUSE to pause. If door unlocks (during certain phases), you may add forgotten items. Close door and press START/PAUSE to resume.

Drum Clean: Run monthly without laundry at 90°C with detergent to prevent mould and odours.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; do not use abrasive cleaners.

1. Detergent dispenser: Pull out, rinse under tap, dry, and reinsert.
2. Door seal: Wipe clean and dry to prevent mildew. Check for foreign objects.
3. Drain pump filter: Clean every 2-3 months. Place towel below filter cap. Turn counterclockwise to open, remove debris, rinse, and refit.
4. Leave door and dispenser slightly ajar after use to ventilate drum.

CAUTION! Never use harsh chemicals, solvents, or steam cleaners on the machine.

Regulatory Information

CE Marked: Complies with EU directives for safety and electromagnetic compatibility. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Use authorised collection points. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact the service number in your country. This appliance is intended for household use only.

Troubleshooting

Reset: Unplug machine for 5 minutes to reset electronic control.

Service: For persistent issues, contact authorised Hotpoint service. Have model and serial number ready.