Hotpoint washing machine NDB 8635 W UK manual

The Hotpoint NDB 8635 W is a freestanding 8kg capacity washing machine with an A+++ energy rating, featuring 1400 RPM spin speed, multiple wash programs including Cotton, Synthetics, Delicates, Wool, and Quick Wash, a delay timer up to 24 hours, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent drawer, drum, water inlet hoses, drain hose, and adjustable feet.

Feature	Description
Capacity	8kg load capacity
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM
Wash Programs	16 programs including Eco, Cotton, Quick 30'
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	AquaStop technology
Display	Digital with time remaining indicator
Door	Reversible for left/right opening
Dimensions (HxWxD)	850 x 600 x 545 mm

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if needed (red marker).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Plug into grounded power socket.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

Check installation: Ensure hoses are secure and machine is level.
Run empty wash: Select Cotton 90°C program without detergent to clean drum.
Set preferences: Use control dial to select language (default English), set clock.
Load detergent: Fill drawer compartments as per detergent type.

CAUTION! Use only recommended detergents; overfilling can cause overflow.

Specifications

Model: NDB 8635 W UK
Capacity: 8kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 52 litres per cycle (Cotton 60°C)
Spin Speed: 1400 RPM
Noise Level (Wash/Spin): 53/76 dB(A)
Programs: 16 including Cotton, Synthetics, Delicates, Wool, Quick Wash, Eco 40-60
Dimensions: 850 x 600 x 545 mm (HxWxD)
Power Supply: 220-240V, 50Hz, 10A

Controls and Settings

Control Panel: Rotary dial for program selection, START/PAUSE button, option buttons (Delay, Extra Rinse, etc.), digital display.

Programs: Cotton (20°C-90°C), Synthetics (30°C-60°C), Delicates (30°C), Wool, Quick 30', Eco 40-60, Drum Clean, Spin Only, Rinse & Spin.

Options: Delay Start (1-24h), Extra Rinse, Pre-Wash, Speed Wash, Reduced Creases. Settings: Child Lock (press and hold Delay + Extra Rinse for 3 sec), volume control for end-of-cycle signal.

Connecting Water & Drain

Water Inlet: Cold fill only (or hot/cold if model supports). Drain: Standpipe or sink.

Turn off water supply before connecting hoses.
Connect inlet hoses to taps; hand-tighten, then quarter turn with spanner.
Place drain hose in standpipe (60-100 cm height) or over sink edge.
Ensure no kinks in hoses.

Tip: Check for leaks after first connection; run short cycle to test.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 8kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn dial to desired program (e.g., Cotton 40°C).
Set options: Press Extra Rinse, Delay, etc. as needed.
Start: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to pause; turn dial to change program.
End of cycle: Signal sounds; door unlocks after short delay.

WARNING! Do not open door during high-temperature washes; wait for unlock signal.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Locks controls during wash. Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles. Drum Clean: Run monthly with detergent to prevent odours.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep door slightly open between washes to ventilate.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016 and EU Ecodesign Directive. Waste electrical products must not be disposed of with household waste. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug is in socket; press START/PAUSE.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Water not draining	Drain blocked/pump filter	Check drain hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 min, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk