Hotpoint Washing Machine NDB 10748 WA Manual

The Hotpoint NDB 10748 WA is a freestanding washing machine with a 7 kg load capacity, featuring multiple wash programs, energy-efficient A+++ rating, 1400 RPM spin speed, LED display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Load Capacity	7 kg (dry laundry)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Wash Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	AquaStop system
Display	LED with time remaining indicator
Door	Reversible, with safety lock
Dimensions (HxWxD)	850 x 600 x 540 mm

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (and hot if applicable). Ensure seals are tight.
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press POWER button.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
Set preferences: Use SETTINGS button to set time, end signal volume, etc.
Load laundry: Do not exceed 7 kg; separate colors and fabrics.
Add detergent: Use dispenser drawers (I: pre-wash, II: main wash, *: softener).

CAUTION! Use only HE (High Efficiency) detergent. Overloading reduces wash quality.

Specifications

Model: NDB 10748 WA
Capacity: 7 kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 45 liters per cycle (cotton 60°C)
Spin Speed: 1400 RPM (adjustable)
Noise Level: Wash: 53 dB, Spin: 73 dB
Programs: 15 including Eco 40-60, Wool, Sport, Anti-Allergy
Power Supply: 220-240V, 50Hz
Weight: 68 kg

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR knob, OPTIONS buttons (Delay, Spin Speed, Temp), SETTINGS.

Programs: Cotton (20°C-90°C), Synthetics, Delicates, Quick Wash (30 min), Wool, Silk, Drum Clean. Options: Delay Start (1-24h), Spin Speed (0-1400 RPM), Temperature (cold-90°C). Settings: Language, acoustic signal, child lock (press and hold START 3 sec).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue: cold, red: hot). Drain: Secure hose to standpipe (max 100 cm high).

Ensure taps are off before connecting hoses.
Check for leaks after turning on water.
Drain hose must not be submerged to avoid siphoning.

Tip: Use only provided hoses; replace if damaged.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load loosely, close firmly.
Add detergent: Fill drawers appropriately.
Select program: Turn knob to desired program.
Set options: Adjust temperature, spin, delay if needed.
Start: Press START/PAUSE. LED shows time remaining.
Pause/change: Press START/PAUSE to pause; change only before start.
End: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during wash; wait until lock light goes off.

Maintenance & Cleaning

Regular cleaning ensures performance and longevity.

Detergent drawer: Remove monthly, clean under warm water.
Door seal: Wipe clean after cycles; check for objects.
Drum: Run "Drum Clean" monthly or use washing machine cleaner.
Filter: Clean drain pump filter every 2-3 months (see manual for location).
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Never use harsh chemicals.

Safety Features

Child Lock: Disables controls (activate by holding START 3 sec). Door Safety Lock: Prevents opening during wash. Anti-Flood: AquaStop shuts off water if leak detected. Overload Protection: Adjusts water and time if overloaded.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Label regulations. Waste disposal: Dispose according to local WEEE regulations. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power, door, child lock	Check plug; ensure door closed; disable child lock.
No water intake	Taps, hoses, filter	Open taps; check hose kinks; clean inlet filter.
Water doesn't drain	Drain hose, pump filter	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts, leveling, load	Remove transit bolts; level feet; redistribute load.
Error codes (e.g., F01)	Various faults	Consult manual; unplug for 5 min; if persists, call service.

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.eu