Hotpoint washing machine NBT 946 WM A IT manual

The Hotpoint NBT 946 WM A IT is a freestanding washing machine with a 9kg capacity, energy class A+++, 1400 RPM spin speed, and multiple wash programs. It features a digital display, delay start, child lock, anti-crease function, and is designed for household use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Digital control panel, detergent dispenser, drum, door with safety lock, water inlet/outlet hoses, adjustable feet.

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
2. Adjust feet: Turn to level machine; use spirit level.
3. Connect water inlet: Attach hose to cold water tap; ensure washers are fitted.
4. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and power on; run initial empty wash.

1. Check connections: Ensure water and drain hoses are secure.
2. Select program: Turn dial to "Cotton 60°C".
3. Add detergent: Pour into compartment II (main wash).
4. Start: Press Start/Pause; let complete full cycle.
5. Set preferences: Use Settings button for buzzer volume, etc.

CAUTION! First wash may contain residual water; this is normal.

Specifications

• Model: NBT 946 WM A IT
• Capacity: 9kg
• Energy Rating: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: 10,000 litres per year
• Spin Speed: 1400 RPM
• Noise Level: Wash 53 dB, Spin 73 dB
• Programs: 15 including Eco 40-60, Wool, Sport, Drum Clean
• Dimensions: 85 x 60 x 60 cm (HxWxD)
• Power Supply: 230-240V, 50Hz

Controls and Settings

Control Panel: Program dial, Display, Start/Pause, Option buttons (Delay, Speed, Temp), Settings.

Program Dial: Select from 15 programs. Display: Shows time, options, status. Options: Adjust spin speed, temperature, delay start. Settings: Buzzer volume, child lock, factory reset.

Detergent Dispenser: Compartment I (pre-wash), II (main wash), III (fabric softener).

Connecting Utilities

Water: Cold water inlet hose (3/4 inch). Drain: Hose to standpipe (max height 100 cm). Power: Grounded socket.

1. Turn off water and power before connecting.
2. Attach inlet hose to tap; hand-tighten only.
3. Secure drain hose; avoid kinks.
4. Plug into dedicated socket; avoid extension cords.

Tip: Check for leaks after first connection.

Using Wash Programs

Supports cotton, synthetics, delicates, wool, etc.

1. Load laundry: Do not exceed 9kg; distribute evenly.
2. Add detergent: Use compartments I/II as needed; fabric softener in III.
3. Select program: Turn dial (e.g., Cotton 40°C).
4. Adjust options: Press Temp, Speed, Delay to modify.
5. Start: Press Start/Pause; display shows time remaining.
6. Pause/change: Press Start/Pause to stop; wait for door lock to release.
7. End of cycle: Buzzer sounds; remove laundry promptly.

WARNING! Do not open door during wash; wait for lock indicator to go off.

Special Functions

Delay Start: Press Delay, then +/- to set hours (up to 24). Child Lock: Press and hold Settings for 3 seconds; repeat to disable. Anti-Crease: Automatically tumbles after wash if not opened. Drum Clean: Run monthly without laundry to clean drum.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

CE marked; complies with EU directives. Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center. Waste disposal: Dispose of packaging and old appliance according to local regulations.

Troubleshooting

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu