Hotpoint washing machine NBT 116 BLACK IT manual

The Hotpoint NBT 116 BLACK IT is a 6kg capacity freestanding washing machine with 1200 RPM spin speed, featuring multiple wash programs, energy efficiency class A+++, AquaStop leak protection, delay timer, child lock, and anti-crease function. Designed for standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent dispenser, drum with stainless steel interior, AquaStop system, adjustable feet.

Feature	Description
Capacity	6kg laundry load
Spin Speed	Up to 1200 RPM
Energy Class	A+++ (most efficient)
AquaStop	Leak protection system
Programs	15 wash programs including Cotton, Synthetics, Delicates
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Crease	Reduces wrinkles after wash
Display	LED with time remaining indicators
Quick Wash	30-minute program for small loads

Installation

Unpack and remove all transit bolts and packaging. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap (3/4" thread).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Level the machine: Adjust front feet using spanner; use spirit level.
Plug into grounded power outlet.

WARNING! Do not install in temperatures below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Run empty wash: Select Cotton 90°C program without detergent.
Set water hardness: In settings menu, adjust based on local water.
Load detergent: Fill compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn rotary selector to desired program.

CAUTION! Ensure machine is level to prevent vibration. Check all connections for leaks.

Specifications

Model: NBT 116 BLACK IT
Capacity: 6kg
Spin Speed: 1200 RPM (adjustable)
Dimensions (HxWxD): 85 x 60 x 55 cm
Water Pressure: 0.5 - 10 bar
Power Supply: 220-240V, 50Hz
Power Consumption: 1900W max
Programs: 15 including Eco 40-60, Wool, Sport
Noise Level: 53 dB (wash), 73 dB (spin)
Weight: 68kg

Controls and Settings

Control Panel: POWER button, rotary program selector, START/PAUSE, delay timer, child lock, option buttons.

Programs: Cotton (20°C-90°C), Synthetics (30°C-60°C), Delicates (30°C), Wool, Silk, Quick 30', Eco 40-60, Sport, Jeans, Mix, Drum Clean, Spin, Rinse+Drain.

Options: Extra Rinse, Pre-wash, Anti-crease, Delay Start (1-24h), Speed Perfect (reduces time). Settings: Water hardness (1-4), acoustic signals (on/off), child lock (press 3 sec).

Connecting Water Supply

Cold water connection only. Use supplied hose.

Ensure water tap is off.
Screw inlet hose to machine (right side, blue ring).
Connect other end to cold water tap (3/4").
Open tap fully; check for leaks.
Place drain hose in standpipe (min 60cm, max 100cm height).

Tip: Do not use old hoses. Ensure hose is not kinked.

Using Wash Programs

Follow load guidelines: max 6kg dry weight.

Sort laundry: By color and fabric type.
Load machine: Do not overload; distribute evenly.
Add detergent: Use compartments I, II, * as needed.
Select program: Turn rotary selector.
Add options: Press Extra Rinse, Delay, etc.
Start: Press START/PAUSE; door locks automatically.
End of cycle: Acoustic signal sounds; door unlocks after 2 min.
Unload promptly: Use Anti-crease if delayed.

WARNING! Do not open door during wash. Remove all objects from pockets.

Safety Features

Child Lock: Press and hold for 3 seconds to activate/deactivate. AquaStop: Automatic water shut-off if leak detected. Door lock: Automatically locks during wash. Imbalance control: Reduces spin speed if load uneven.

Care & Cleaning

Monthly maintenance recommended.

Clean detergent drawer: Remove and rinse under water.
Clean door seal: Wipe rubber gasket; remove debris.
Run Drum Clean program: Monthly with special cleaner or 90°C wash.
Clean filter: Turn drain pump cap counterclockwise; remove objects.
Exterior: Wipe with damp cloth; no abrasive cleaners.

CAUTION! Unplug before cleaning. Do not use steam cleaners.

Regulatory Information

CE compliant. Energy label according to EU regulation 2019/2014. Waste electrical products must not be disposed with household waste. Contact local authority for recycling. For support, visit www.hotpoint.eu or contact Hotpoint Italy: 800-123-456.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START.
No water intake	Tap/hose	Ensure tap open; check hose for kinks; clean filter.
Water doesn't drain	Drain hose/filter	Check hose position; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet.
Error codes (E01-E10)	Various faults	Consult manual; unplug for 5 min; restart.
Detergent not dispensed	Compartment blocked	Clean detergent drawer; use correct detergent.

Reset: Unplug for 5 minutes, then restart.

Service: 800-123-456; www.hotpoint.eu