Hotpoint washing machine NBT 1046 WDA IT manual

The Hotpoint NBT 1046 WDA IT is a 10kg capacity front-loading washing machine with 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features Hotpoint's exclusive AquaCare technology for gentle fabric care, direct injection motor, anti-vibration system, delay timer, child lock, and easy-to-use electronic controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, and anti-vibration feet.

Feature	Description
Capacity	10kg laundry load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
AquaCare Technology	Gentle washing with optimal water usage
Direct Injection Motor	Quiet and efficient operation
Anti-Vibration System	Reduces noise during spin cycle
Delay Timer	Up to 24 hours start delay
Child Lock	Prevents accidental program changes
Detergent Dispenser	Compartments for pre-wash, main wash, softener
Display	LED with time remaining indicators

Installation

Unpack and remove all transit bolts. Place on level floor.

Position machine: Ensure minimum clearance of 1cm from walls and cabinets.
Connect water supply: Attach inlet hoses to hot and cold water taps (blue for cold, red for hot).
Connect drain hose: Place in standpipe or hook over sink edge (max height 100cm).
Level the machine: Adjust front feet to ensure machine is perfectly level.
Plug into grounded power outlet.

WARNING! Remove all transit bolts before first use. Failure to do so will cause severe damage.

First-Time Setup

After installation, run an empty wash cycle to clean the drum.

Connect power and turn on machine: Press POWER button.
Select drum clean program: Turn program selector to "Drum Clean" position.
Add machine cleaner: Pour into detergent compartment II (main wash).
Start cycle: Press START/PAUSE button.
Set preferences: Use OPTIONS button to select spin speed, temperature, etc.

CAUTION! Ensure water connections are tight to prevent leaks. Check for kinks in hoses.

Specifications

Model: NBT 1046 WDA IT
Capacity: 10kg (cotton)
Spin Speed: 1400 RPM (adjustable)
Energy Class: A+++
Water Consumption: Approx. 52 liters per cycle (cotton 60°C)
Noise Level: 53 dB (washing), 73 dB (spinning)
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 72 kg
Power Supply: 220-240V, 50Hz
Programs: 16 including Cotton, Synthetics, Delicates, Wool, Quick Wash

Controls and Settings

Control Panel: POWER button, program selector knob, START/PAUSE, OPTIONS buttons, display.

Program Selector: Turn to choose wash program (Cotton, Synthetics, Delicates, Wool, etc.).

Options: Temperature selection (cold to 90°C), spin speed (0-1400 RPM), extra rinse, delay start (1-24h). Display: Shows time remaining, selected options, and error codes. Child Lock: Press and hold OPTIONS buttons for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Two hoses (hot and cold) with filter screens. Drain: Flexible hose with U-shaped end.

Ensure water taps are off before connecting hoses.
Screw inlet hoses hand-tight to corresponding taps (blue=cold, red=hot).
Connect other ends to machine inlet valves (marked I and II).
Place drain hose in standpipe (max height 100cm) or over sink edge.
Secure hose to prevent slipping.

Tip: Check inlet hose filters monthly and clean if clogged.

Using Wash Programs

Select appropriate program for fabric type.

Load laundry: Open door, load items loosely (do not overload).
Add detergent: Pour into appropriate compartments (I=pre-wash, II=main wash, III=softener).
Select program: Turn knob to desired program (e.g., Cotton 60°C).
Adjust options: Press OPTIONS to modify temperature, spin speed, extra rinse.
Start: Press START/PAUSE. Door locks automatically.
After cycle: "End" appears on display. Wait 2 minutes for door lock to release.
Unload: Remove laundry promptly to prevent wrinkles.

WARNING! Do not open door during wash cycle. Hot water and moving parts present danger.

Special Functions

Delay Start: Set 1-24 hour delay. Press DELAY button repeatedly to select time. Extra Rinse: Adds additional rinse cycle for sensitive skin. Rapid Programs: 30°C and 15' for lightly soiled loads. Drum Clean: Runs high-temperature cycle to clean drum (use monthly).

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, and drain filter.

Detergent dispenser: Pull out drawer, rinse under warm water.
Door seal: Wipe with damp cloth to remove lint and residue.
Drain filter: Turn off machine, open filter cover (front bottom right), place towel, unscrew filter, clean debris.
Run drum clean program monthly with machine cleaner.

CAUTION! Unplug machine before cleaning filter. Have towel ready for residual water.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Manufactured according to ISO 9001 quality standards. For support, visit www.hotpoint.eu or contact Hotpoint Assistenza Italia at 848 800 800 (toll-free).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is properly closed; check power outlet and cord.
No water intake	Taps closed/filters clogged	Open water taps; clean inlet hose filters.
Water doesn't drain	Drain hose clogged/kinked	Check hose for kinks; clean drain filter.
Excessive vibration	Transit bolts not removed/uneven floor	Remove all 4 transit bolts; level the machine.
Error code on display	Various faults	Consult error code list in manual; reset by unplugging for 1 minute.
Leaking water	Loose connections/hose damage	Tighten all hose connections; check for cracks in hoses.

Reset: Unplug for 1 minute to reset electronic control.

Service: 848 800 800; www.hotpoint.eu