Hotpoint washing machine Maxi WMG 642 manual

The Hotpoint Maxi WMG 642 is a freestanding washing machine with a 6kg capacity, featuring multiple wash programs, energy efficiency, spin speed options, and user-friendly controls. It includes safety features, installation guidelines, and maintenance instructions. Below are key sections covering safety, features, installation, operation, programs, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with program selector, detergent dispenser, door with safety lock, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	6kg maximum load
Spin Speed	Up to 1200 rpm
Energy Rating	A-rated for efficiency
Programs	Cotton, Synthetics, Delicates, Quick Wash, etc.
Delay Start	Timer function up to 24 hours
Child Lock	Safety feature to prevent accidental changes
Door Lock	Automatic during cycle
Display	LED indicators for cycle progress
Detergent Dispenser	Compartments for pre-wash, main wash, softener
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove transit bolts. Place on solid, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using wrench; ensure it does not rock.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without laundry.

Check installation: Ensure hoses are secure, transit bolts removed.
Open water taps fully.
Add detergent: Pour 100ml of detergent into dispenser drawer.
Select program: Turn selector to "Cotton 60°C" and press Start.
After cycle, machine is ready for normal use.

CAUTION! Do not load laundry during first wash. Keep children away during operation.

Specifications

Model: Maxi WMG 642
Capacity: 6kg (dry weight)
Dimensions (HxWxD): 85cm x 60cm x 60cm
Spin Speed: 1200 rpm (adjustable)
Water Pressure: 0.5 - 10 bar
Power Supply: 230V~50Hz
Power Consumption: 2100W max
Programs: 12 including Eco, Quick, Delicates
Noise Level: 59 dB(A) washing, 77 dB(A) spinning
Weight: 65kg

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Temperature button, Spin Speed button, Delay Start button, Option buttons.

Program Selector: Turn to choose wash program (Cotton, Synthetics, Wool, etc.). Temperature: Adjust from cold to 90°C. Spin Speed: Adjust from Rinse Hold to 1200 rpm. Delay Start: Set timer up to 24 hours. Options: Extra Rinse, Pre-wash, Easy Iron. Display: Shows time remaining, cycle stage, and settings.

Connecting Water & Drain

Water Inlet: Connect hoses to hot/cold taps (if machine has dual inlet) or cold only. Drain: Hose to standpipe (min 60cm height) or sink.

Turn off taps before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Ensure drain hose is not kinked and is secured.
Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by color and fabric type.
Load machine: Do not exceed 6kg; distribute evenly.
Add detergent: Use drawer compartments as directed.
Select program: Turn knob to desired program (e.g., Cotton for cottons).
Adjust settings: Set temperature, spin speed, options if needed.
Start: Press Start/Pause; door locks automatically.
After cycle: Remove laundry promptly; leave door ajar to dry.

WARNING! Do not open door during cycle; wait for unlock signal. Do not wash waterproof items.

Special Functions

Delay Start: Set timer for later start. Child Lock: Press and hold buttons to activate. Extra Rinse: Adds rinse for sensitive skin. Pre-wash: For heavily soiled loads. Easy Iron: Reduces wrinkles. Rinse Hold: Stops with water in drum for easy handwashing.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal and glass to remove lint. Run maintenance wash every 30 cycles: use hot program with machine cleaner or vinegar.

CAUTION! Do not use abrasive cleaners. Empty pockets to avoid damage.

Regulatory Information

CE marked; complies with EU directives. Energy label class A. Waste disposal: Dispose of machine according to local regulations; remove door for safety. For support, visit www.hotpoint.eu or contact 08448 224 224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug, fuse; ensure door closed properly.
No water intake	Taps/hoses/filter	Open taps; check hoses for kinks; clean inlet filter.
Water does not drain	Drain hose/pump	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute load; level feet.
Leaking water	Hoses/seal	Tighten connections; check door seal for debris.
Unusual noise	Foreign objects	Check for coins, buttons in drum or pump.
Error codes displayed	Various faults	Consult manual for code meaning; reset by unplugging.

Reset: Unplug for 5 minutes, then restart.

Service: 08448 224 224; www.hotpoint.eu