Hotpoint washing machine Maxi ARXL 145 manual

The Hotpoint Maxi ARXL 145 is a freestanding washing machine with a 6 kg load capacity, multiple wash programs, energy efficiency class A, spin speed up to 1400 rpm, delay timer, child lock, and anti-flood protection. It features a durable stainless steel drum, LED display, and easy-to-use controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, control panel with LED display, detergent drawer, water inlet hoses, drain hose, adjustable feet, and power cord.

FeatureDescription
Capacity6 kg maximum load
Spin SpeedUp to 1400 rpm
Energy RatingClass A (energy efficient)
ProgramsCotton, Synthetics, Delicates, Quick Wash, Wool, etc.
Delay TimerUp to 24 hours delay start
Child LockPrevents accidental program changes
Anti-Flood ProtectionAutomatic water shut-off in case of leak
DisplayLED with time remaining and cycle indicators
Door LockAutomatic during operation
Adjustable FeetFor leveling on uneven floors

Installation

Unpack and remove transit bolts. Place on stable, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
  3. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
  4. Level the machine: Adjust feet using wrench; use spirit level to check.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

  1. Check installation: Ensure all bolts removed, hoses connected, machine level.
  2. Power on: Plug in and press POWER button.
  3. Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
  4. Set preferences: Use OPTIONS button to adjust spin speed, temperature, etc.
  5. Load detergent: Fill drawer compartments as per detergent instructions.

CAUTION! Never use machine without removing transit bolts—can cause severe damage.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTIONS (temperature, spin, delay), CHILD LOCK.

Programs: Cotton (40°C–90°C), Synthetics (30°C–60°C), Delicates (cold–40°C), Quick Wash (30°C), Wool, Silk, Sportswear, Eco 40–60, Rinse & Spin, Drain Only.

Options: Temperature selection (cold to 90°C), Spin speed (0–1400 rpm), Delay start (1–24 hrs), Extra Rinse, Pre-wash.

Display: Shows program duration, time remaining, selected options, and error codes.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual supply). Drain: Place hose in standpipe (max height 100 cm) or sink.

  1. Turn off taps before connecting hoses.
  2. Use only supplied hoses; do not reuse old ones.
  3. Ensure drain hose is not kinked and is securely placed.
  4. Check for leaks after first run.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 6 kg; distribute evenly.
  2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
  3. Select program: Turn selector knob to desired program.
  4. Adjust options: Press OPTIONS to change temperature, spin, delay, etc.
  5. Start: Press START/PAUSE; door locks automatically.
  6. Pause/stop: Press START/PAUSE to pause; turn knob to reset to stop.
  7. End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during spin cycle. Unbalanced load may cause vibration—redistribute laundry.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 sec to lock controls. Anti-Flood: Automatic water shut-off if leak detected. Door Lock: Prevents opening during wash/spin. Overheat Protection: Thermostat prevents overheating.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, drum, and filters.

  1. Detergent drawer: Remove and rinse under warm water.
  2. Drum: Run empty hot wash (90°C) with drum cleaner or vinegar.
  3. Filter: Turn off machine, open filter cover at front, place towel, unscrew filter, clean debris.
  4. Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Never use harsh chemicals on drum.

Regulatory Information

CE certified; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4224. Waste disposal: Dispose of machine according to local WEEE regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower, door, child lockCheck plug/power; ensure door closed; disable child lock.
No water intakeTaps, hoses, filterOpen taps; check hose for kinks; clean inlet filter.
Excessive vibrationTransit bolts, leveling, loadRemove transit bolts; adjust feet; redistribute laundry.
Water not drainingDrain hose, filterCheck hose for kinks/blockage; clean pump filter.
Error codes (e.g., F01)Various faultsConsult manual error code list; reset by unplugging 5 min.
LeakingHoses, detergentTighten hose connections; use correct detergent amount.

Reset: Unplug for 5 minutes, then restart.

Service: +44 (0) 344 822 4224; www.hotpoint.eu

Hotpoint washing machine Maxi ARXL 145 manual © - All Rights Reserved 2025