Hotpoint Washing Machine HTWP1400FWW Manual

The Hotpoint HTWP1400FWW is a 14kg capacity top-loading washing machine with 8 wash programs, digital display, delay start, child lock, and energy-efficient operation. It features a stainless steel drum, adjustable water levels, and spin speeds up to 1200 RPM. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Stainless steel drum, Water inlet valves, Drain pump, Adjustable feet, Detergent dispenser.

Feature	Description
Capacity	14kg (dry laundry weight)
Wash Programs	8 programs including Cotton, Quick Wash, Delicates, Heavy Duty
Spin Speed	Up to 1200 RPM (adjustable)
Delay Start	Up to 24 hours delay timer
Child Lock	Prevents accidental program changes
Water Level	5 adjustable levels for efficiency
Digital Display	Shows time remaining, program, and settings
Energy Rating	A++ energy efficiency class
Dimensions	60cm W x 85cm H x 60cm D
Power	220-240V, 50Hz, 10A

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use wrench to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn leveling feet to stabilize; use spirit level to check.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Secure to standpipe or sink (minimum height 60cm).
Plug into grounded power outlet.

WARNING! Machine is heavy; use two people for moving. Ensure transit bolts are removed before operation.

First-Time Setup

Power on machine; run initial setup cycle.

Check connections: Ensure water hoses are tight and drain hose is secure.
Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use PROGRAM knob and OPTIONS buttons to configure default settings.
Test child lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

CAUTION! Do not use detergent during first empty wash. Ensure machine is level to prevent vibration.

Specifications

Model: HTWP1400FWW
Capacity: 14kg
Programs: 8 (Cotton, Synthetic, Delicates, Wool, Quick 30', Heavy Duty, Rinse+Spin, Spin Only)
Max Spin Speed: 1200 RPM
Water Pressure: 0.5-10 bar (cold/hot inlet)
Power Consumption: 2100W (heating), 500W (motor)
Noise Level: 65 dB (wash), 75 dB (spin)
Dimensions: 600 x 850 x 600 mm (WxHxD)
Weight: 68kg
Warranty: 2 years parts and labor

Controls and Settings

Control Panel: PROGRAM knob, START/PAUSE, OPTIONS (Temp, Spin, Delay), CHILD LOCK, DISPLAY.

Program Selection: Turn knob to desired program (Cotton, Synthetic, etc.). Options: Adjust temperature (30°C-90°C), spin speed (0-1200 RPM), delay start (1-24h). Display: Shows time remaining, selected options, and error codes. Child Lock: Press and hold for 3 seconds; icon appears when active.

Detergent Dispenser: Main wash compartment (II), pre-wash (I), fabric softener (*). Use amounts per detergent instructions.

Connecting Water Supply

Hot and cold water inlets; drain hose outlet.

Turn off taps before connecting hoses.
Connect blue hose to cold tap, red to hot (if available).
Use supplied washers; tighten by hand, then quarter-turn with pliers.
Place drain hose in standpipe (min 60cm height) or over sink edge.
Open taps fully; check for leaks.

Tip: Use only new hoses; replace every 5 years. Do not kink hoses.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by color, fabric type, and soil level.
Load machine: Do not exceed 14kg; distribute evenly.
Add detergent: Use dispenser compartments as labeled.
Select program: Turn knob (e.g., Cotton for towels/bedding).
Set options: Adjust temperature, spin, delay as needed.
Start: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to stop; wait 2 minutes to open lid.
After wash: Remove laundry promptly; leave lid open to dry drum.

WARNING! Do not overload. Remove coins/objects from pockets. Close zippers and hooks.

Safety Features

Child Lock: Disables controls when active. Lid Lock: Automatically locks during wash; unlocks at end or after pause delay. Overflow Protection: Auto shut-off if water level too high. Unbalanced Load Detection: Reduces spin speed or stops if load uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly; run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners or solvents. Clean filter every 3 months.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/lid	Check plug; ensure lid closed properly; press START firmly.
No water intake	Taps/hoses	Ensure taps open; check hose kinks; clean inlet filters.
Water doesn't drain	Drain hose/filter	Check hose height/blockage; clean pump filter.
Excessive vibration	Level/load	Adjust feet for level; redistribute laundry; remove transit bolts.
Error code E01	Water inlet fault	Check water pressure; ensure hoses connected.
Error code E02	Drain fault	Clear drain hose; check pump filter.
Detergent not dissolving	Dispenser clogged	Clean dispenser compartments; use correct detergent type.
Lid locked mid-cycle	Safety lock	Wait for program end or pause for 2 minutes.

Reset: Unplug for 5 minutes; replug to clear errors.

Service: 1-800-447-2882; www.hotpoint.com