Hotpoint Washing Machine HSWP1000MWW Manual

The Hotpoint HSWP1000MWW is a 10kg capacity top-load washing machine featuring multiple wash programs, energy-efficient operation, adjustable spin speeds, delay start timer, child lock, and a durable stainless steel drum. Designed for household use with 120V AC power. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Stainless steel drum, Water inlet valves, Drain pump, Adjustable leveling feet, Detergent dispenser.

Feature	Description
Capacity	10kg (22 lbs) maximum load
Wash Programs	12 programs including Cotton, Synthetic, Delicate, Quick Wash
Spin Speed	Adjustable up to 1200 RPM
Delay Start	Timer up to 24 hours
Child Lock	Prevents accidental program changes
Water Level	Automatic sensing and adjustment
Display	LED digital display with time remaining
Door Lock	Automatic during operation
Energy Rating	ENERGY STAR certified
Dimensions	60cm W x 85cm H x 60cm D

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use wrench to remove all four bolts from rear.
Adjust leveling feet: Turn feet clockwise/counterclockwise until machine is stable.
Connect water supply: Attach inlet hoses to hot and cold water taps (if applicable).
Connect drain hose: Place hose into standpipe or sink (minimum height 60cm).
Plug into grounded electrical outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run an empty wash cycle with detergent.

Power on machine: Press POWER button.
Select cleaning cycle: Choose "Drum Clean" or "Cotton" program at 90°C.
Add detergent: Pour washing machine cleaner or detergent into drum.
Start cycle: Press START/PAUSE to begin.
Set preferences: Use SETTINGS button to configure beep volume, default spin speed.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: HSWP1000MWW
Capacity: 10kg (22 lbs)
Power Supply: 120V AC, 60Hz, 15A
Water Pressure: Minimum 0.5 bar, Maximum 8 bar
Max Spin Speed: 1200 RPM
Programs: 12 including Cotton, Synthetic, Wool, Delicate, Quick Wash (15 min), Sportswear, Bedding, Drum Clean
Dimensions (WxHxD): 60 x 85 x 60 cm
Weight: 68 kg
Energy Consumption: 0.95 kWh per cycle (Cotton 60°C)
Water Consumption: 52 liters per cycle (average)

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, SPIN SPEED, TEMPERATURE, OPTIONS (Delay Start, Extra Rinse, Pre-wash), START/PAUSE, CHILD LOCK.

Display: Shows selected program, time remaining, spin speed, temperature, and active options.

Program Selection: Turn knob to desired program. Temperature: 30°C, 40°C, 60°C, 90°C, Cold. Spin Speed: 400, 600, 800, 1000, 1200 RPM, Rinse Hold, No Spin. Options: Delay Start (1-24h), Extra Rinse, Pre-wash, Quick Wash. Settings Menu: Beep volume, default spin, temperature unit (°C/°F).

Connecting Water Supply

Connect to cold water tap (standard) or both hot/cold if available.

Turn off water supply before connecting hoses.
Attach inlet hoses to water taps (blue for cold, red for hot).
Connect other ends to machine inlet valves (match colors).
Open water taps fully and check for leaks.
Place drain hose securely in standpipe or over sink edge.

Tip: Use only provided hoses; replace every 5 years. Do not kink hoses.

Using Wash Programs

Follow fabric care labels. Sort laundry by color and fabric type.

Load laundry: Do not exceed maximum capacity.
Add detergent: Use dispenser drawer (main wash, pre-wash, softener).
Select program: Turn knob to appropriate program.
Adjust settings: Set temperature, spin speed, and options as needed.
Start: Press START/PAUSE. Door locks automatically.
Pause/change: Press START/PAUSE to pause; wait for door unlock signal.
End of cycle: Signal sounds; door unlocks after short delay.

WARNING! Do not open door during spin cycle. Wait for drum to stop completely.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Door Lock: Automatic during operation; unlocks at end of cycle or when paused. Overflow Protection: Automatically stops water intake if detected. Unbalanced Load Detection: Reduces spin speed or stops if load is uneven.

Care & Cleaning

Monthly maintenance recommended.

Clean detergent drawer: Remove and rinse under warm water.
Clean door seal: Wipe with damp cloth to remove lint and residue.
Run drum clean: Use "Drum Clean" program monthly without laundry.
Clean exterior: Use mild detergent and soft cloth.
Check drain pump filter: Clean every 2-3 months (see manual for instructions).

CAUTION! Unplug machine before cleaning. Do not use abrasive cleaners.

Regulatory Information

UL Listed: Complies with UL 2157 standard. Energy Star: Meets ENERGY STAR requirements for energy efficiency. FCC Part 15: Class B digital device. For support, visit www.hotpoint.com or contact 1-800-374-4432. This product is covered by a one-year limited warranty.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock	Check power cord; ensure child lock is off; close door properly.
No water intake	Water supply/taps	Ensure water taps are open; check inlet hoses for kinks; clean filter.
Water doesn't drain	Drain hose/filter	Check drain hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust leveling feet; redistribute load.
Door won't open	Water in drum/safety lock	Wait for door lock light to go off; run drain/spin program.
Error codes displayed	Various faults	Consult error code table in manual; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 1-800-374-4432; www.hotpoint.com