Hotpoint washing machine HDA3740GSA manual

The Hotpoint HDA3740GSA is a 7kg capacity freestanding washing machine with A+++ energy rating, 1400 rpm spin speed, and multiple wash programs including Cotton, Synthetic, Delicates, Wool, and Quick Wash. Features include LED display, delay timer, child lock, anti-flood system, and anti-vibration design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	7kg load capacity for standard household use
Energy Rating	A+++ for high energy efficiency
Spin Speed	1400 rpm maximum spin speed
Wash Programs	15 programs including Cotton, Synthetic, Delicates
Display	LED digital display showing time and settings
Delay Timer	Up to 24 hours delay start function
Child Lock	Safety lock to prevent accidental changes
Anti-Flood System	Protection against water leakage
Anti-Vibration Design	Reduced noise and movement during spin
Quick Wash	30-minute program for lightly soiled loads

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if available (red marker).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Level the machine: Adjust front feet using spanner; use spirit level to check.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash.

Check connections: Ensure water taps are fully open and hoses secure.
Add detergent: Pour 100ml of detergent into drawer compartment II.
Select program: Turn knob to Cotton 90°C; press Start/Pause.
Run empty wash: Let complete cycle to clean drum and remove residues.
Set preferences: Use Settings button to adjust beep volume, etc.

CAUTION! First wash may contain water residues; this is normal.

Specifications

Model: HDA3740GSA
Capacity: 7kg
Energy Class: A+++
Spin Speed: 1400 rpm
Water Pressure: 0.5-10 bar
Programs: 15 including Cotton, Synthetic, Delicates, Wool, Quick Wash
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Noise Level: 53 dB (wash), 73 dB (spin)
Weight: 68 kg

Controls and Settings

Control Panel: Program knob, LED display, Start/Pause, Delay, Settings, Child Lock.

Program Knob: Select from 15 programs. LED Display: Shows time remaining, delay, settings. Start/Pause: Start or pause cycle. Delay Timer: Set delay up to 24 hours. Settings Button: Adjust beep volume, end signal, etc. Child Lock: Press and hold 3 seconds to activate/deactivate.

Wash Programs: Cotton (40°C-90°C), Synthetic (40°C-60°C), Delicates (30°C), Wool (hand wash cycle), Quick Wash (30 min), Spin Only, Rinse & Spin. Options: Extra Rinse, Pre-Wash, Anti-Crease.

Connecting Water Supply

Cold water connection required; hot water optional.

Turn off water taps before connecting hoses.
Connect blue-marked hose to cold water tap; red to hot if available.
Ensure seals are intact; hand-tighten connections.
Check for leaks after turning taps on.

Tip: Use only supplied hoses; replace if damaged.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7kg; distribute evenly.
Add detergent: Use compartment I for pre-wash, II for main wash, III for softener.
Select program: Turn knob to desired program.
Set options: Press Extra Rinse, Pre-Wash, etc. as needed.
Start: Press Start/Pause; display shows time remaining.
Pause: Press Start/Pause to pause; door locks during wash.
End of cycle: Signal sounds; door unlocks after 2 minutes.

WARNING! Do not open door during wash; wait for unlock signal.

Special Functions

Delay Timer: Set delay start up to 24 hours. Child Lock: Prevents program changes. Anti-Crease: Reduces wrinkles by tumbling after cycle. Extra Rinse: Adds rinse for sensitive skin. Pre-Wash: For heavily soiled loads.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Detergent drawer: Remove and rinse under warm water.
Door seal: Wipe with damp cloth; remove debris.
Filter: Turn drain pump filter anti-clockwise; clean under running water.
Drum: Run empty Cotton 90°C cycle with washing machine cleaner.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives. Energy label according to EU regulation 2019/2014. Waste electrical products must not be disposed with household waste. Contact local authority for recycling. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check power outlet; press Start.
No water intake	Taps closed/hose kinked	Open water taps; check hose for kinks; clean filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine.
Water not draining	Drain hose blocked	Check drain hose height (60-100 cm); clean pump filter.
Error codes (E01-E10)	Various faults	Refer to manual error code list; reset by unplugging.

Reset: Unplug for 5 minutes; plug back in.

Service: 0344 822 4224; www.hotpoint.eu