Hotpoint washing machine HDA3600VWW manual

The Hotpoint HDA3600VWW is a 6kg capacity front-loading washing machine with 1200 RPM spin speed, featuring multiple wash programs, energy efficiency class A+++, delay timer, child lock, quick wash cycle, and anti-crease function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	6 kg (dry laundry)
Spin Speed	Up to 1200 RPM
Energy Class	A+++ (most efficient)
Wash Programs	14 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Crease	Reduces wrinkles at end of cycle
Display	LED digital display with time remaining
Door Lock	Automatic safety lock during operation
Dimensions	85 x 60 x 55 cm (H x W x D)

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before first use.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Select maintenance cycle: Turn program dial to "Drum Clean" or run a 90°C cotton cycle without laundry.
Add detergent: Pour 100 ml of special cleaner or white vinegar into detergent drawer.
Start cycle: Press START/PAUSE.
Set language: If applicable, use settings button to select language.

CAUTION! Ensure all packaging and transit bolts are removed. Check for water leaks after first connection.

Specifications

Model: HDA3600VWW
Capacity: 6 kg
Max Spin Speed: 1200 RPM
Energy Rating: A+++
Water Consumption: ~49 liters per cycle (cotton 60°C)
Power Supply: 220-240V AC, 50Hz
Noise Level: 53 dB (washing), 73 dB (spinning)
Programs: 14 including Eco 40-60, Wool, Sport, Jeans
Dimensions: 85 x 60 x 55 cm
Weight: 68 kg

Controls and Settings

Control Panel: POWER button, program dial, temperature button, spin speed button, delay timer button, options buttons, START/PAUSE.

Program Dial: Select from 14 programs (Cotton, Synthetic, Delicate, Quick 15', Wool, etc.).

Temperature: Adjust from cold to 90°C. Spin Speed: Adjust from no spin to 1200 RPM. Options: Extra Rinse, Pre-Wash, Anti-Crease, Delay Start (1-24 hrs). Display: Shows time remaining, selected options, and error codes.

Connecting Water Supply

Use supplied hoses; do not reuse old hoses.

Turn off water taps.
Connect hoses: Screw onto taps (hand tight plus ½ turn with pliers).
Connect to machine: Attach hoses to corresponding inlets (L=hot, R=cold).
Check for leaks: Turn on taps slowly; inspect connections.
Drain hose: Secure in standpipe (max 100 cm height) or over sink edge.

Tip: Use only new hoses. Ensure inlet filters are clean.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 6 kg; distribute evenly.
Add detergent: Pour into main wash compartment (II). For pre-wash, use compartment I.
Select program: Turn dial (e.g., Cotton for towels/bed sheets).
Adjust settings: Set temperature, spin speed, and options if needed.
Start: Press START/PAUSE; door locks automatically.
Pause: Press START/PAUSE to pause; door unlocks after 2 minutes if water level is safe.
End of cycle: Signal sounds; door unlocks. Remove laundry promptly.

WARNING! Do not open door during wash/spin. Unbalanced load may cause machine to stop.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Detergent drawer: Remove monthly; clean under running water.
Door seal: Wipe monthly; remove debris to prevent mold.
Drum: Run empty 90°C cycle monthly with drum cleaner.
Filter: Clean drain filter every 3 months (located behind lower panel).
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Do not use steam cleaners.

Safety Features

Child Lock: Press and hold CHILD LOCK button for 3 seconds to activate/deactivate. Door Lock: Automatically locks during operation; unlocks at end or if paused safely. Overflow Protection: Automatically stops water intake if detected. Unbalance Detection: Stops spin and redistributes load if uneven.

Regulatory Information

Complies with EU directives for safety (EN 60335-1) and electromagnetic compatibility (EN 55014). Energy label according to EU regulation 2019/2014. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4224.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses/filter	Ensure taps on; check hoses for kinks; clean inlet filters.
Water doesn't drain	Drain hose/filter	Check hose for blockages; clean drain filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error code on display	Various faults	Consult manual error code list; unplug for 5 minutes then retry.
Door won't open	Water/cycle	Wait for cycle to end or water to drain; machine may be hot.

Reset: Unplug for 5 minutes, then restart.

Service: +44 (0) 344 822 4224; www.hotpoint.eu