Hotpoint washing machine HDA3600NWW manual

The Hotpoint HDA3600NWW is a 6kg capacity front-loading washing machine with 1200 RPM spin speed, featuring multiple wash programs, energy efficiency class A+++, delay start, child lock, quick wash cycle, and anti-allergy options. It includes a digital display, rotary program selector, and detergent dispenser. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Digital Display, Rotary Program Selector, Detergent Dispenser, Water Inlet Hoses, Drain Hose, Power Cord.

FeatureDescription
Capacity6kg laundry load
Spin SpeedUp to 1200 RPM
Energy ClassA+++ (most efficient)
ProgramsCotton, Synthetics, Delicates, Quick Wash, Wool, Anti-Allergy
Delay StartUp to 24 hours
Child LockPrevents accidental program changes
Digital DisplayShows time, cycle stage, and settings
Rotary SelectorSelects wash programs
Detergent DispenserCompartments for detergent, softener, pre-wash
Door LockAutomatic during cycle

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
  3. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
  4. Plug into grounded power outlet.

WARNING! Machine is heavy; use two people. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial setup.

  1. Run empty cycle: Select Cotton program at 90°C without laundry to clean drum.
  2. Set language: If display allows, select ENGLISH (default).
  3. Adjust settings: Use options button for spin speed, temperature, etc.
  4. Test child lock: Press and hold relevant buttons to activate/deactivate.

CAUTION! Ensure machine is level; adjust feet if necessary to prevent vibration.

Specifications

Controls and Settings

Access settings via rotary selector and option buttons. Front Panel: POWER, START/PAUSE, OPTIONS, CHILD LOCK.

Display: Shows time remaining, cycle, spin speed, temperature, delay start.

Programs: Select via rotary knob (Cotton, Synthetics, etc.). Options: Adjust spin speed (400-1200 RPM), temperature (cold-90°C), extra rinse, delay start (1-24h). Child Lock: Press and hold for 3 seconds to enable/disable. Display: Shows settings and countdown.

Connecting Utilities

Water: Inlet hoses to taps. Drain: Hose to standpipe. Power: Grounded outlet.

  1. Turn off water taps before connecting hoses.
  2. Ensure drain hose is not kinked and is secure.
  3. Plug directly into wall outlet; avoid extension cords.

Tip: Check for leaks after first connection; tighten if necessary.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Open door, load evenly, close securely.
  2. Add detergent: Pour into dispenser compartments (main wash, pre-wash, softener).
  3. Select program: Turn knob to desired program (e.g., Cotton).
  4. Set options: Adjust temperature, spin speed, extra rinse if needed.
  5. Start: Press START/PAUSE; door locks automatically.
  6. Pause/stop: Press START/PAUSE to pause; turn knob to reset to stop.
  7. Delay start: Press DELAY button, set hours, then START.
  8. End of cycle: Signal sounds; door unlocks after short delay.

WARNING! Do not open door during cycle; wait for unlock signal. Overloading reduces wash quality.

Safety Features

Child Lock: Prevents program changes. Door Lock: Automatic during operation. Overflow Protection: Shuts off water if detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly; run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at local number provided in warranty card.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug and outlet; ensure door is closed properly.
No water intakeTaps/hosesEnsure taps are on; check hoses for kinks; clean inlet filter.
Excessive vibrationTransit bolts/levelingVerify transit bolts removed; adjust feet to level machine.
Water not drainingDrain hoseCheck for kinks; clean pump filter; ensure standpipe not blocked.
Error codes on displayVarious faultsRefer to manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service center; www.hotpoint.eu

Hotpoint washing machine HDA3600NWW manual © - All Rights Reserved 2025