Hotpoint washing machine HDA3500NBB manual

The Hotpoint HDA3500NBB is a freestanding washing machine with a 7kg capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a delay timer, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent dispenser, drum, water inlet hoses, drain hose, and adjustable feet.

FeatureDescription
Capacity7kg laundry load
Spin SpeedUp to 1400 RPM
Energy RatingA+++ (most efficient)
Programs15+ including Cotton, Synthetics, Delicates, Quick Wash
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
AquaStopLeak protection system
DisplayDigital with time remaining and status icons
DoorReversible for left/right opening
Dimensions (HxWxD)85 x 60 x 55 cm

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level the machine; use spirit level to check.
  3. Connect water supply: Attach inlet hoses to cold water tap (blue ring) and machine.
  4. Connect drain hose: Place hose into standpipe or sink (max height 100cm).
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on: Plug in and press power button.
  2. Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
  3. Set preferences: Use settings button to adjust buzzer volume, etc.
  4. Load detergent: Fill detergent dispenser compartments as needed.

CAUTION! Ensure all packaging is removed. Check for water leaks after first connection.

Specifications

Controls and Settings

Control Panel: Rotary dial (select program), Start/Pause button, Delay Timer button, Option buttons (e.g., Extra Rinse, Prewash), Child Lock button, Display.

Program Selection: Turn dial to desired program (e.g., Cotton, Synthetics). Display shows default time/temp.

Options: Press option buttons to modify: Temperature (30°C-90°C), Spin Speed (0-1400 RPM), Extra Rinse, Prewash, Rapid (reduces time).

Delay Timer: Press Delay button, use +/- to set start time (up to 24h).

Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue-cold hose to cold water tap. Drain: Place hose securely.

  1. Ensure taps are off before connecting hoses.
  2. Use only supplied hoses; do not reuse old ones.
  3. Drain hose must not be kinked or submerged.
  4. After connection, open taps fully and check for leaks.

Tip: Use a drain hose extension if needed, but ensure maximum height is not exceeded.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Sort laundry: Separate by colour and fabric.
  2. Load machine: Do not exceed 7kg; distribute evenly.
  3. Add detergent: Use compartment I (prewash), II (main wash), * (softener).
  4. Select program: Turn dial (e.g., Cotton for towels/bed linen).
  5. Set options: Adjust temperature, spin speed if needed.
  6. Start: Press Start/Pause. Door locks and cycle begins.
  7. After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not wash items soaked in solvents or flammable liquids. Remove coins, keys from pockets.

Special Functions

Delay Start: Set timer for wash to finish at desired time. Child Lock: Prevents changes during cycle. AquaStop: Automatically shuts off water if leak detected. Drum Clean: Program to clean drum and prevent odours (run monthly).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly (pull out, rinse). Clean door seal and glass to remove lint. Run Drum Clean program every 30 washes.

CAUTION! Do not use abrasive cleaners or high-pressure water jets.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Manufacturer: Hotpoint, a Haier company. For EU product registration, visit www.hotpoint.eu/register. Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check plug/power; ensure Child Lock is off.
No water intakeTaps off/hose kinkedOpen taps; check hose for kinks; clean inlet filter.
Water doesn't drainDrain hose blockedCheck hose for blockages; ensure height < 100cm.
Excessive vibration/noiseTransit bolts left in/uneven loadRemove transit bolts; redistribute laundry; level feet.
Error code on displayVarious faultsConsult error code list in manual; unplug for 5 mins, retry.
LeaksLoose connectionsTighten hoses; check door seal; ensure detergent dispenser closed.

Reset: Unplug for 5 minutes, then restart.

Service: For repairs, contact Hotpoint service: 0800 316 1444 (UK) or visit www.hotpointservice.co.uk

Hotpoint washing machine HDA3500NBB manual © - All Rights Reserved 2025