Hotpoint washing machine HDA3400GWW manual

The Hotpoint HDA3400GWW is a front-loading washing machine with a 4.0 cubic foot capacity, featuring multiple wash cycles, temperature settings, spin speed options, and energy-efficient operation. It includes advanced features like delay start, child lock, and a digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, digital control panel, detergent dispenser, water inlet valves, drain pump, and adjustable leveling feet.

Feature	Description
Capacity	4.0 cubic feet for large laundry loads
Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, Rinse & Spin
Temperature Settings	Hot, Warm, Cold, Tap Cold
Spin Speeds	Multiple speeds up to 1200 RPM
Delay Start	Program wash start up to 24 hours in advance
Child Lock	Prevents accidental changes to settings
Digital Display	Shows cycle time, settings, and error codes
Energy Star Certified	Energy-efficient operation
Detergent Dispenser	Compartments for detergent, bleach, fabric softener
Leveling Feet	Adjustable for stable installation

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove shipping materials: Take out transit bolts from rear.
Connect water supply: Attach hot and cold water hoses to corresponding valves.
Connect drain hose: Secure to standpipe or laundry sink.
Level the machine: Adjust front feet until machine is stable.
Plug into grounded electrical outlet.

WARNING! Machine is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on machine; run initial test cycle.

Select language: Press SETTINGS button to choose display language.
Run clean cycle: Use Tub Clean cycle without laundry to flush system.
Set default preferences: Configure temperature, spin speed defaults if available.
Test operation: Run a quick wash cycle to ensure proper function.

CAUTION! Ensure machine is level to prevent vibration. Keep area around machine clear.

Specifications

Capacity: 4.0 cubic feet.
Dimensions: 27" W x 38" H x 30" D.
Voltage: 120V AC, 60Hz.
Water Connections: Hot and cold water inlet.
Max Spin Speed: 1200 RPM.
Energy Rating: Energy Star certified.
Cycle Options: 12 wash cycles, 5 temperature settings.
Display: LED digital display with touch controls.
Weight: 180 lbs.

Controls and Settings

Access settings via control panel buttons and dial.

Control Panel: POWER, CYCLE SELECTOR dial, START/PAUSE, OPTIONS (Temperature, Spin Speed, Delay Start), CHILD LOCK, SETTINGS.

Cycle Selection: Turn dial to choose cycle (Normal, Heavy Duty, Delicates, Quick Wash, Rinse & Spin, Tub Clean). Options: Adjust temperature (Hot, Warm, Cold, Tap Cold), spin speed (High, Medium, Low, No Spin), delay start (1-24 hours). Settings: Language, default preferences, buzzer volume. Child Lock: Press and hold for 3 seconds to enable/disable.

Connecting Water Supply

Hot and cold water inlets; drain hose connection.

Turn off water supply before connecting hoses.
Connect hoses: Red to hot, blue to cold; hand-tighten, then quarter turn with wrench.
Drain hose: Place in standpipe (minimum height 39 inches) or secure to sink.
Check for leaks: Turn on water supply and inspect connections.

Tip: Use only new hoses; replace every 5 years. Ensure drain hose is not kinked.

Using Wash Cycles

Supports various fabrics and soil levels.

Load laundry: Open door, load items loosely, close door securely.
Add detergent: Pour into main wash compartment; bleach and softener in designated slots.
Select cycle: Turn dial to desired cycle.
Adjust options: Press TEMPERATURE, SPIN SPEED, DELAY START as needed.
Start: Press START/PAUSE; display shows remaining time.
Pause/Stop: Press START/PAUSE to pause; hold for 3 seconds to cancel.
Unload: Wait for door lock to release; remove laundry promptly.

WARNING! Do not overload drum. Balance loads to prevent vibration. Keep door slightly open between cycles to prevent odors.

Special Features

Delay Start: Program start time. Child Lock: Prevents changes during cycle. Tub Clean: Run monthly to clean drum. Quick Wash: 30-minute cycle for lightly soiled items.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly; run Tub Clean cycle regularly.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Ensure plugged in; door closed securely; press START/PAUSE.
No water filling	Water supply/hoses	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Adjust leveling feet; redistribute load evenly.
Water not draining	Drain hose/pump	Check drain hose for clogs; clean pump filter.
Error codes on display	Various faults	Refer to manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-432-2737; www.hotpoint.com