Hotpoint Washing Machine HDA2100VCC Manual

The Hotpoint HDA2100VCC is a freestanding washing machine with a 7kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features electronic controls, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	7kg laundry load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Programs	15 wash programs including Cotton, Synthetic, Delicates, Quick Wash
Display	Digital display with time remaining
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	Automatic water shut-off protection
Door Lock	Automatic during cycle
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if dual supply).
Connect drain hose: Place in standpipe or sink; secure to prevent slipping.
Level the machine: Adjust feet using a spanner; check with spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or extreme heat. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Power on: Plug in and press POWER button.
Run empty wash: Select Cotton program at 90°C without laundry.
Set preferences: Use SETTINGS button to adjust beep volume, display brightness.
Load detergent: Fill dispenser compartments as per detergent instructions.
Select program: Turn program selector; press START/PAUSE.

CAUTION! Ensure transit bolts are removed before use to prevent damage.

Specifications

Model: HDA2100VCC
Capacity: 7kg
Spin Speed: 1400 RPM (adjustable)
Energy Class: A+++
Water Consumption: Approx. 45 litres per cycle (Cotton 60°C)
Noise Level: Washing: 53 dB; Spinning: 75 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V, 50Hz
Programs: 15 including Eco, Wool, Hand Wash, Sport, Drum Clean
Special Features: Delay timer, child lock, anti-crease, extra rinse

Controls and Settings

Control Panel: POWER button, program selector knob, digital display, START/PAUSE, OPTIONS buttons.

Display Icons: Time remaining, child lock, delay start, spin speed, temperature.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetic, Delicates). Options: Press OPTIONS to adjust spin speed (0-1400 RPM), temperature (cold-90°C), extra rinse, pre-wash. Settings Menu: Hold SETTINGS for 3 seconds to access beep volume, display brightness, factory reset. Child Lock: Press and hold CHILD LOCK for 3 seconds; icon appears.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if applicable). Drain: Place hose in standpipe (max height 100 cm) or over sink edge.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not overtighten.
Secure drain hose to prevent movement during spin.
Check for leaks after first connection.

Tip: Install a drip tray if machine is on a wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7kg; distribute evenly.
Add detergent: Open dispenser; fill compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetic for synthetics).
Adjust options: Press OPTIONS to change temperature, spin speed, extra rinse.
Start: Press START/PAUSE; door locks and cycle begins.
Pause/change: Press START/PAUSE to stop; wait for door unlock (2 min).
After cycle: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not open door during wash or spin; wait for unlock icon.

Special Functions

Delay Start: Set delay (1-24 hrs) before wash begins. Child Lock: Locks controls during cycle. Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles. Extra Rinse: Adds rinse cycle for sensitive skin. Drum Clean: Run monthly with detergent to clean drum (select Drum Clean program).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly; run Drum Clean program monthly.

CAUTION! Do not use abrasive cleaners; never hose down machine.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured under license by Hotpoint. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses	Ensure taps on; check hoses for kinks; clean inlet filter.
Water leaks	Connections	Tighten hoses; check drain hose position; ensure detergent dispenser closed.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute laundry.
Poor wash results	Detergent/loading	Use correct detergent amount; do not overload; select proper program.
Door won't open	Cycle active/water	Wait for cycle end or door unlock; machine may still contain water.
Error codes (e.g., F01)	Fault	Unplug for 5 min; replug. If persists, consult manual or call support.

Reset: Unplug for 5 minutes to reset electronics.

Service: 03448 113 113; www.hotpoint.co.uk