Hotpoint washing machine HDA2100NWW manual

The Hotpoint HDA2100NWW is a 10kg capacity freestanding washing machine with A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features a durable stainless steel drum, digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, Digital control panel, Water inlet valves, Drain pump, Adjustable feet, Detergent dispenser.

Feature	Description
Capacity	10kg load capacity for large households
Spin Speed	Up to 1400 RPM for efficient drying
Energy Rating	A+++ for low energy consumption
Display	Digital display with time remaining indicator
Programs	15 wash programs including Cotton, Synthetics, Delicates
Delay Start	Up to 24 hours delay timer
Child Lock	Safety lock for control panel
Anti-Flood	AquaStop protection against water leaks
Quick Wash	30-minute program for lightly soiled items
Noise Level	Low noise operation (washing: 53 dB, spinning: 75 dB)

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using wrench; use spirit level to check.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Place in standpipe or sink; secure with hook.
Plug into grounded power outlet.

WARNING! Do not install in temperatures below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash.

Connect power: Plug into grounded outlet; ensure water taps are open.
Select language: Press and hold START/PAUSE for 3 seconds to cycle languages.
Run cleaning cycle: Add 100ml white vinegar, select "Drum Clean" program at 90°C.
Set default options: Use SETTINGS button to configure beep volume, end signal.

CAUTION! Ensure all packaging materials and transit bolts are removed.

Specifications

Model: HDA2100NWW
Capacity: 10kg
Dimensions (HxWxD): 85 x 60 x 60 cm
Spin Speed: 1400 RPM
Energy Rating: A+++ (Annual consumption: 175 kWh)
Water Consumption: 52 liters per cycle (Cotton 60°C)
Programs: 15 including Eco 40-60, Wool, Sport, Jeans
Noise Level: Washing: 53 dB, Spinning: 75 dB
Power Supply: 220-240V, 50Hz, 10A
Weight: 72kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, TEMPERATURE, SPIN SPEED, OPTIONS, START/PAUSE.

Display Icons: Child Lock, Delay Start, Time Remaining, Temperature, Spin Speed.

Programs: COTTON (20°C-90°C), SYNTHETICS (30°C-60°C), DELICATES (cold-30°C), WOOL, SPORT, JEANS, QUICK 30, ECO 40-60, DRUM CLEAN. Options: PRE-WASH, EXTRA RINSE, DELAY START (1-24h), CHILD LOCK (press 3 sec). Settings: BEEP volume (High/Low/Off), END SIGNAL (On/Off), RESET defaults.

Connecting Water & Drain

Water Inlet: Hot (red) and cold (blue) hoses. Drain: Flexible hose with U-shaped end.

Turn off water taps before connecting hoses.
Connect inlet hoses: Hand-tighten; do not overtighten.
Position drain hose: Height between 60-100cm from floor; secure to prevent slipping.
Check for leaks: Run short rinse cycle and inspect connections.

Tip: Use hose supports if drain hose is longer than 1.5m.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by color and fabric type.
Load machine: Do not exceed 10kg; distribute evenly.
Add detergent: Use dispenser compartments (I=pre-wash, II=main wash, *=fabric softener).
Select program: Turn selector to desired program.
Adjust settings: Set temperature, spin speed, and options.
Start: Press START/PAUSE; display shows time remaining.
Pause/Add: Press START/PAUSE to pause; door unlocks after 2 minutes if safe.
End of cycle: Signal sounds; remove laundry promptly.

WARNING! Do not wash waterproof items or items with solvents.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Press and hold CHILD LOCK for 3 seconds. Anti-Crease: Continues tumbling after cycle end if not opened. Drum Clean: Run monthly with detergent at 90°C.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Clean door seal to remove lint.

CAUTION! Do not use abrasive cleaners. Clean filter every 3 months.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Label regulations. Waste electrical products must not be disposed of with household waste. For support, visit www.hotpoint.co.uk or contact 03448 225 225 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock	Check power outlet; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Ensure taps are open; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose height (60-100cm); clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute load.
Error codes (E01-E10)	Various faults	Consult manual error code list; unplug for 5 minutes and retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 225 225 (UK); www.hotpoint.co.uk