Hotpoint washing machine HDA2000VWW manual

The Hotpoint HDA2000VWW is a front-loading washing machine with a 5kg capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1200 RPM, delay timer, child lock, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, control panel with digital display, detergent drawer, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	5kg (dry weight)
Spin Speed	Up to 1200 RPM
Energy Class	A (energy efficient)
Wash Programs	Cotton, Synthetics, Delicates, Quick Wash, Wool, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Door Lock	Automatic during operation
Display	LED digital display showing time and status
Detergent Drawer	Compartments for pre-wash, main wash, softener
Adjustable Feet	For leveling the machine

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Level the machine: Adjust feet using wrench; ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run an empty wash cycle.

Check installation: Ensure all transit bolts removed, hoses connected, machine level.
Open water taps: Turn on hot/cold water supply fully.
Select program: Turn dial to "Cotton 90°C" without detergent.
Start cycle: Press START/PAUSE; let complete to clean internal system.
Set preferences: Use control buttons to set language, buzzer volume, etc.

CAUTION! Do not load laundry during first empty cycle. Keep children away during operation.

Specifications

Model: HDA2000VWW
Capacity: 5kg
Dimensions (HxWxD): 85cm x 60cm x 55cm
Spin Speed: 1200 RPM (adjustable)
Energy Rating: A
Water Pressure: 0.5 - 10 bar
Power Supply: 220-240V, 50Hz
Programs: 12 including Cotton, Synthetics, Delicates, Quick Wash (30°C), Wool, Rinse & Spin, Drain
Noise Level: Wash: 55 dB; Spin: 75 dB
Weight: 65kg

Controls and Settings

Control Panel: Program dial, START/PAUSE button, option buttons (Delay, Spin Speed, Temperature), display, and child lock.

Program Dial: Select wash programs (Cotton, Synthetics, Delicates, Quick Wash, Wool, etc.).

Option Buttons: Adjust temperature (cold to 90°C), spin speed (0 to 1200 RPM), delay timer (1-24h).

Display: Shows remaining time, selected options, and error codes.

Child Lock: Press and hold DELAY + SPIN SPEED for 3 seconds to activate/deactivate.

Connecting Water Supply

Connect to cold water tap (or hot/cold if machine supports). Use provided hoses.

Turn off taps and unplug machine.
Screw inlet hoses onto taps; use washers provided.
Connect other ends to machine inlet valves (blue for cold, red for hot if applicable).
Open taps fully; check for leaks.
Place drain hose in standpipe (height 60-100cm) or sink; secure.

Tip: Do not kink hoses. Use only new hoses; replace every 5 years.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 5kg; distribute evenly.
Add detergent: Pour into correct drawer compartment (I for pre-wash, II for main wash, * for softener).
Select program: Turn dial (e.g., Cotton for cottons, Synthetics for blends).
Adjust options: Press TEMPERATURE, SPIN SPEED, DELAY as needed.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to pause; wait for door unlock signal.
End of cycle: Buzzer sounds; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during wash/spin; wait for unlock indicator. Remove all objects from pockets.

Safety Features

Child Lock: Prevents accidental program changes. Door Lock: Automatically locks during operation; unlocks at end or when paused. Overflow Protection: Automatically stops water if detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Regular maintenance ensures longevity.

Clean detergent drawer: Remove monthly; rinse under tap.
Clean door seal: Wipe monthly to remove lint/residue.
Run maintenance wash: Monthly, use hot cotton program without laundry.
Clean filter: Every 3 months; turn off water/power; open filter cover at front; drain water; remove debris.
Exterior: Wipe with damp cloth; no abrasive cleaners.

CAUTION! Unplug before cleaning filter. Do not use harsh chemicals.

Regulatory Information

Complies with EU directives for safety (EN 60335-1, EN 60335-2-7) and electromagnetic compatibility (EN 55014-1, EN 55014-2). Energy label according to EU regulation 2019/2014. Disposal: Follow local regulations; do not dispose with household waste. For support, visit www.hotpoint.eu or contact 08448 224 224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug; ensure child lock off; close door properly.
No water intake	Taps/hoses/filter	Open taps; check hoses for kinks; clean inlet filter.
Water leaks	Hose connections	Tighten connections; check hose condition; replace if damaged.
Excessive vibration/noise	Transit bolts/leveling/load	Remove transit bolts; level machine; redistribute load evenly.
Poor washing results	Detergent/program/load	Use correct detergent amount; select suitable program; do not overload.
Display shows error code	Various faults	Consult manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute, then restart.

Service: 08448 224 224; www.hotpoint.eu