Hotpoint Washing Machine HDA2000GWW Manual

The Hotpoint HDA2000GWW is a 7kg capacity top-load washing machine with 12 wash programs, 1200 RPM spin speed, AquaStop leak protection, delay start timer, quick wash option, and energy efficiency class A. It features a stainless steel drum, LED display, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent dispenser, stainless steel drum, AquaStop system, adjustable feet, drain hose, and water inlet valves.

Feature	Description
Capacity	7kg (dry laundry weight)
Spin Speed	1200 RPM maximum
Wash Programs	12 programs including Cotton, Synthetic, Delicate, Quick Wash
Energy Rating	Class A (most efficient)
AquaStop	Leak protection system
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Display	LED with time remaining indicator
Quick Wash	30-minute program for lightly soiled items
Noise Level	Wash: 56 dB, Spin: 76 dB

Installation

Unpack and remove all transit bolts and packaging. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using wrench; ensure machine is stable.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine inlet valves.
Connect drain hose: Place in standpipe or sink (minimum height 60cm).
Plug into grounded electrical outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press POWER button.
Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use OPTIONS button to set beep volume, default spin speed, etc.
Load detergent: Add to appropriate dispenser compartment (I: pre-wash, II: main wash, *: fabric softener).

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: HDA2000GWW
Capacity: 7kg
Dimensions (HxWxD): 85cm x 60cm x 60cm
Voltage: 220-240V, 50Hz
Power Consumption: 2100W max
Water Pressure: 0.5 - 10 bar
Programs: 12 (Cotton, Synthetic, Delicate, Wool, Quick Wash, Rinse+Spin, etc.)
Spin Speed: Adjustable up to 1200 RPM
Weight: 68kg
Warranty: 2 years parts and labor

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR knob, OPTIONS, DELAY START, CHILD LOCK.

Programs: Cotton (40°C-90°C), Synthetic (40°C-60°C), Delicate (30°C), Wool, Quick Wash (30°C), Rinse+Spin, Drain, etc.

Options: Extra Rinse, Pre-wash, Reduced Creasing, Speed Wash (for Quick program). Settings: Default spin speed (400-1200 RPM), temperature selection, delay start (1-24h), child lock activation (hold CHILD LOCK 3 seconds).

Connecting Water Supply

Use supplied hoses; connect to cold water tap (or hot/cold if machine has dual inlet).

Turn off tap and machine.
Screw hoses onto tap and machine inlet valves (red for hot, blue for cold if applicable).
Open tap fully; check for leaks.
Ensure drain hose is secured in standpipe (not submerged).

Tip: Use only new hoses; replace every 5 years. Do not overtighten.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7kg; distribute evenly.
Add detergent: Use compartment II for main wash; compartment I for pre-wash if selected.
Select program: Turn PROGRAM SELECTOR knob.
Set options: Press OPTIONS for extra rinse, temperature, spin speed.
Start: Press START/PAUSE; display shows time remaining.
Pause: Press START/PAUSE to stop; door locks during wash.
End of cycle: Machine beeps; door unlocks after a few minutes.

WARNING! Do not open door during wash/spin. Unbalanced load may cause vibration; redistribute laundry.

Maintenance & Cleaning

Monthly: Clean detergent dispenser, drum, and door seal. Every 3 months: Run maintenance wash (90°C Cotton without laundry).

Cleaning: Wipe exterior with damp cloth; clean filter (front bottom) to remove lint/debris.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Safety Features

Child Lock: Prevents program changes. Door Lock: Auto-locks during operation. AquaStop: Cuts water supply if leak detected. Overload Protection: Reduces spin speed if unbalanced.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Copyright © Hotpoint. For support, visit www.hotpoint.com or contact 1-800-432-2743. Disposal: Follow local regulations for WEEE (Waste Electrical and Electronic Equipment).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses	Ensure taps open; check hoses for kinks; clean inlet filter.
Excessive vibration	Transit bolts/leveling	Remove transit bolts; adjust feet for level; redistribute load.
Water not draining	Drain hose/filter	Check hose for blockages; clean pump filter.
Error codes (E01-E10)	Various faults	Refer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 1-800-432-2743; www.hotpoint.com