Hotpoint washing machine HBD 8680G ANTISTAIN UK manual

The Hotpoint HBD 8680G ANTISTAIN is a freestanding washing machine featuring AntiStain technology for superior stain removal, a large 8kg capacity, energy-efficient A+++ rating, 1400 rpm spin speed, multiple wash programs including a dedicated AntiStain cycle, delay timer, child lock, and easy-to-use electronic controls. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, detergent dispenser, large door porthole, AntiStain technology system, adjustable feet, water inlet hoses, drain hose.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn feet to level the machine; use a spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (and hot if using dual supply). Ensure washers are fitted.
4. Connect drain hose: Place hose into standpipe or sink; secure with provided U-bend.
5. Plug into a grounded 3-pin socket (220-240V, 13A).

WARNING! Do not install in areas prone to freezing or extreme heat. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Ensure machine is installed and plugged in.
2. Turn on water taps fully.
3. Open detergent dispenser, add a small amount of detergent to compartment II.
4. Close door and select the "Cotton 90°C" program without laundry.
5. Press START/PAUSE to begin cycle. This cleans the drum and removes any residues.
6. After cycle, machine is ready for normal use.

CAUTION! Never use the machine without removing transit bolts. This can cause severe damage.

Specifications

• Model: HBD 8680G ANTISTAIN
• Type: Freestanding Front Loader
• Capacity: 8 kg
• Energy Class: A+++
• Annual Energy Consumption: 175 kWh
• Water Consumption: Approx. 52 litres per cycle (Cotton 60°C)
• Spin Speed: 1400 rpm (adjustable)
• Noise Level (Wash/Spin): 56/76 dB(A)
• Supply Voltage: 220-240V ~ 50Hz
• Max Load Power: 2300 W
• Dimensions: 850 x 596 x 545 mm (HxWxD)

Controls and Settings

Control Panel: POWER button, Program selector dial, LED display, Temperature button, Spin speed button, Option buttons (Delay, Extra Rinse, etc.), START/PAUSE button.

Using Controls: 1. Turn dial to select program (symbols light up). 2. Use TEMP and SPIN buttons to adjust if needed. 3. Select options like DELAY (1-24 hrs) or EXTRA RINSE. 4. Press START/PAUSE to begin. Display shows time remaining. 5. Use CHILD LOCK: Press and hold TEMP and SPIN for 3 seconds. Repeat to deactivate.

Detergent Dispenser: Compartment I (Pre-wash), II (Main wash), * (Fabric softener). Use only low-sudsing detergent for front loaders.

Connecting Water & Drain

Water Inlet: Connect blue-marked hose to cold tap. If machine has dual inlet, red hose to hot tap (optional). Use only supplied hoses; do not reuse old ones.

1. Ensure taps are off.
2. Screw hoses onto taps hand-tight, then a quarter turn with pliers.
3. Connect other ends to machine inlet valves (marked).
4. Drain hose: Insert into standpipe (min. 60 cm height, max 100 cm) or over sink edge. Secure with hook.

Tip: Check for leaks by turning taps on briefly before running a cycle.

Using Wash Programs

Select program based on fabric type and soil level.

1. Sort laundry by colour and fabric.
2. Load machine, do not overload. Distribute evenly.
3. Add detergent and softener to correct compartments.
4. Close door firmly.
5. Select program: e.g., COTTON (60°C) for normal cottons, SYNTHETICS for man-made fabrics, DELICATES for gentle wash, ANTI STAIN for tough stains.
6. Adjust temperature/spin if needed.
7. Press START/PAUSE. Door locks and cycle begins.
8. At end, "End" appears. Wait 2 minutes for door unlock, remove laundry promptly.

WARNING! Do not open door during cycle. Hot water and steam can cause injury.

AntiStain Technology

The dedicated AntiStain program uses a specific sequence of temperatures, soak times, and drum motions to break down common tough stains (grass, wine, grease, etc.).

How to use: 1. Pretreat very heavy stains if desired. 2. Load stained items (max half load for better results). 3. Select the "Anti Stain" program on the dial. 4. The machine automatically selects optimal settings (approx. 2-hour cycle). 5. Use standard detergent. Do not add bleach in the main wash compartment.

For best results, treat stains as soon as possible.

Care & Cleaning

Regular maintenance ensures performance and longevity.

1. Clean detergent dispenser: Pull out drawer, rinse under tap, dry and reinsert.
2. Clean door seal: Wipe rubber gasket with damp cloth to remove lint/ residue.
3. Clean drum: Run "Cotton 90°C" cycle empty every 2 months or use proprietary drum cleaner.
4. Clean filter: Locate behind small flap at front bottom. Place towel, turn filter anti-clockwise to remove, rinse, reinsert firmly.
5. Wipe exterior with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug machine before cleaning filter. Have a tray ready for residual water.

Regulatory Information

This appliance complies with UK and EU safety standards. The symbol indicates separate collection for electrical waste (WEEE). Do not dispose with household waste. For disposal, contact local council or retailer. Manufactured for the UK market. Hotpoint is a trademark of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 0333 305 3513 (UK).

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic control.

Service: For persistent issues, contact Hotpoint Service: 0333 305 3513 or www.hotpoint.co.uk.