Hotpoint washing machine HBD 8680 ANTI STAIN UK manual

The Hotpoint HBD 8680 ANTI STAIN is a freestanding washing machine with a 9kg capacity, featuring Anti-Stain technology for superior stain removal, a 1400 RPM spin speed, and an A+++ energy rating. It includes multiple wash programs, a delay timer, child lock, and a large LED display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Anti-Stain Technology	Special program for removing tough stains
Capacity	9kg drum capacity
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ for high efficiency
Programs	Multiple wash programs including Cotton, Synthetics, Delicates
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
LED Display	Shows time remaining, cycle stage, and settings
Quick Wash	30-minute cycle for lightly soiled loads
Extra Rinse	Option for additional rinsing

Installation

Unpack and inspect contents. Position on flat, stable floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Level machine using adjustable feet; ensure it does not rock.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Plug into power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on machine; perform initial setup.

Run a maintenance wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use control dial and buttons to set default options if available.
Load detergent: Fill compartments in detergent drawer as per instructions.
Test run: Run a short cycle to ensure proper operation.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: HBD 8680 ANTI STAIN
Capacity: 9kg
Spin Speed: 1400 RPM
Energy Rating: A+++
Water Pressure: 0.5 - 8 bar
Programs: Anti-Stain, Cotton, Synthetics, Delicates, Wool, Quick Wash, etc.
Dimensions (HxWxD): 85cm x 60cm x 60cm (approx.)
Power Supply: 220-240V, 50Hz
Noise Level: Wash: 53 dB; Spin: 75 dB

Controls and Settings

Control Panel: Program dial, Start/Pause button, Option buttons (Delay, Extra Rinse, etc.), LED display.

Program Dial: Select wash programs (Anti-Stain, Cotton, Synthetics, Delicates, Wool, Quick Wash, Rinse & Spin, Drain).

Options: Delay Timer (1-24h), Extra Rinse, Child Lock (press and hold for 3 seconds), Temperature selection, Spin speed reduction. Display: Shows time remaining, selected options, and cycle stage.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (and hot) taps. Drain: Place hose securely.

Turn off water taps before connecting hoses.
Use only supplied hoses; do not overtighten.
Ensure drain hose is not kinked and is at correct height (60-100cm from floor).
Check for leaks after first connection.

Tip: Use hose clips if provided for secure drain connection.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by colour and fabric type.
Load drum: Do not overload; leave space for movement.
Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn dial to desired program (e.g., Anti-Stain for tough stains).
Set options: Press buttons for temperature, spin speed, extra rinse, or delay.
Start: Press Start/Pause; machine will begin cycle.
Pause/change: Press Start/Pause to pause; turn dial to change program (if allowed).
End of cycle: Machine beeps; remove laundry promptly to avoid creasing.

WARNING! Do not open door during high-temperature cycles; wait for lock light to go off.

Special Functions

Anti-Stain Program: Specifically designed for removing stubborn stains like grass, wine, grease. Child Lock: Prevents accidental program changes; activate by holding button. Delay Timer: Set start time up to 24 hours in advance.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer and drum regularly.

Monthly Maintenance: Run a hot wash (90°C) without laundry to clean drum. Clean filter periodically as per instructions.

CAUTION! Do not use abrasive cleaners or solvents.

Regulatory Information

Complies with UK safety and electromagnetic compatibility standards. CE marked. For support, visit www.hotpoint.co.uk or contact 03448 225 225 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is firmly closed; check power outlet and plug.
No water intake	Taps off/hoses kinked	Open water taps; check hoses for kinks; clean inlet filter.
Water not draining	Drain hose blocked	Check drain hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error codes on display	Various faults	Consult manual for specific error code meaning; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute to reset electronic control.

Service: 03448 225 225; www.hotpoint.co.uk