Hotpoint washing machine HBD 1781 ANTI STAIN UK manual

The Hotpoint HBD 1781 ANTI STAIN is a freestanding washing machine with a 7kg capacity, featuring Anti-Stain technology for targeted stain removal, multiple wash programs including a 15-minute Quick Wash, energy efficiency rating, delay timer, child lock, and spin speed up to 1400 rpm. Designed for UK household use with 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Anti-Stain Technology 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent dispenser, drum with Anti-Stain feature, water inlet valves, drain pump, and adjustable feet.

FeatureDescription
Anti-Stain TechnologyPre-programmed cycles targeting specific stains (wine, grass, mud, etc.)
Capacity7kg drum suitable for family loads
Spin SpeedUp to 1400 rpm for efficient drying
Quick Wash15-minute cycle for lightly soiled items
Delay TimerUp to 24 hours delay start
Child LockPrevents accidental program changes
Energy RatingHigh energy efficiency class
DisplayDigital display showing time, cycle stage, and settings
Detergent DispenserCompartments for pre-wash, main wash, and fabric softener
Adjustable FeetFor levelling the machine on uneven floors

Installation

Unpack and inspect contents. Place on solid, level floor near water and drain points.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hose to cold water tap (3/4”); ensure washers are fitted.
  3. Connect drain hose: Place hose into standpipe or sink; secure with provided hook.
  4. Level the machine: Adjust front feet to ensure machine is stable; use spirit level.
  5. Plug into power outlet: Use dedicated 13A socket; do not use extension lead.

WARNING! Machine is heavy; use two people for lifting. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and power on machine; run initial empty wash.

  1. Set language: Press and hold START/PAUSE and OPTION buttons for 3 seconds to select English.
  2. Run cleaning cycle: Select “Drum Clean” program without laundry to remove manufacturing residues.
  3. Load detergent: Fill dispenser drawer as per instructions for first wash.
  4. Select program: Turn dial to desired wash cycle; adjust options as needed.
  5. Start cycle: Press START/PAUSE to begin.

CAUTION! Do not load laundry during first cleaning cycle. Ensure water connections are tight to prevent leaks.

Specifications

Controls and Settings

Control Panel: Rotary dial for program selection, digital display, option buttons, and START/PAUSE.

Buttons: START/PAUSE, OPTION (for temperature, spin speed, extra rinse), CHILD LOCK, DELAY START.

Programs: Cotton (40°C-90°C), Synthetic (30°C-60°C), Delicates (cold-30°C), Wool (cold-30°C), Anti-Stain (pre-set for stains), Quick Wash (15 min), Drum Clean (maintenance). Options: Temperature selection, spin speed reduction, extra rinse, pre-wash. Settings: Child lock (press and hold for 3 seconds), delay timer (1-24 hours).

Connecting Water & Drain

Water Inlet: Cold fill only. Drain: Hose to standpipe or sink.

  1. Turn off water supply before connecting hoses.
  2. Connect inlet hose to machine first, then to tap; tighten by hand.
  3. Place drain hose into standpipe (height 60-100 cm) or over sink edge; secure.
  4. Check for leaks: Run short rinse cycle and inspect connections.

Tip: Do not kink or bend hoses. Ensure drain hose is not submerged to prevent siphoning.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Sort laundry: Separate by colour and fabric type.
  2. Load drum: Do not overload; leave space for movement.
  3. Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
  4. Select program: Turn dial to required cycle (e.g., Cotton for towels).
  5. Adjust options: Press OPTION to change temperature, spin speed, or add extra rinse.
  6. Start: Press START/PAUSE; display shows remaining time.
  7. Pause/stop: Press START/PAUSE to pause; turn dial to reset to stop.
  8. Unload: Remove laundry promptly after cycle ends; leave door ajar to dry drum.

WARNING! Do not open door during high-temperature washes; wait for safety lock to release. Check pockets for objects.

Anti-Stain Technology

Pre-set cycles for common stains: Select Anti-Stain program, then choose stain type via OPTION button (wine, grass, mud, oil, etc.). Cycle uses specific temperature, time, and agitation for optimal removal.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run Drum Clean program every 30 cycles. Wipe exterior with damp cloth; do not use abrasive cleaners.

CAUTION! Do not use harsh chemicals; clean filter periodically to prevent blockages.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) directive: Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 03448 247 365.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug is switched on; ensure door is closed properly.
No water intakeTap/hoseEnsure tap is on; check hose for kinks; clean inlet filter.
Water doesn't drainDrain hose/filterCheck hose for blockages; clean pump filter.
Excessive vibrationTransit bolts/loadEnsure transit bolts removed; redistribute laundry; level feet.
Error codes on displayFault detectionRefer to manual code list; reset by unplugging for 1 minute.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 247 365; www.hotpoint.co.uk

Hotpoint washing machine HBD 1781 ANTI STAIN UK manual © - All Rights Reserved 2025