Hotpoint washing machine HB 93G CARE UK manual

The Hotpoint HB 93G CARE is a freestanding washing machine designed for UK households, featuring a 9kg capacity, energy-efficient A+++ rating, multiple wash programs including a dedicated Cottons cycle, Quick Wash, and Delicates. It includes a 1400 RPM spin speed, delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg drum, Electronic Control Dial, LED Display, Detergent Drawer, Filter Access, Adjustable Feet, Water Inlet Hoses, Drain Hose.

Feature	Description
Capacity	9kg for large loads
Energy Rating	A+++ for high efficiency
Spin Speed	1400 RPM for faster drying
Wash Programs	15 programs including Cottons, Synthetics, Delicates
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Quick Wash	30-minute cycle for lightly soiled items
Anti-Flood Protection	AquaStop technology
Display	LED with time remaining indicator
Door	Reversible for flexible installation

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine inlet.
Connect drain hose: Place into standpipe or sink; secure with provided hook.
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into 230V AC power socket.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash.

Set language: Press and hold START/PAUSE for 3 seconds to select English.
Load detergent: Fill drawer compartment II with powder or liquid for first wash.
Run cleaning cycle: Select "Drum Clean" program at 90°C without laundry.
Adjust settings: Use CONTROL dial to explore programs; set default options if needed.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: HB 93G CARE.
Capacity: 9kg.
Energy Class: A+++.
Spin Speed: 1400 RPM.
Programs: 15 including Cottons (40°C, 60°C, 90°C), Synthetics, Delicates, Wool, Quick Wash.
Water Pressure: 0.5 - 10 bar.
Power Supply: 230V AC, 50Hz.
Dimensions (HxWxD): 85cm x 60cm x 60cm.
Noise Level: 65 dB (washing), 75 dB (spinning).

Controls and Settings

Access programs via CONTROL dial. Buttons: START/PAUSE, OPTION, CHILD LOCK.

Display: Shows program time, delay timer, spin speed, temperature.

Program Selection: Turn dial to desired program (e.g., Cottons 60°C). Options: Press OPTION to adjust spin speed (400-1400 RPM), temperature (Cold-90°C), or enable Delay Timer. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Detergent Drawer: Compartment I (Pre-wash), II (Main wash), III (Fabric softener).

Connecting Water & Drain

Water Inlet: Cold fill only (blue hose). Drain: Standpipe or sink.

Ensure water tap is off before connecting hoses.
Connect inlet hose to machine (right side) and tap; hand-tighten.
Place drain hose into standpipe (max height 100cm) or over sink edge.
Check for leaks by turning tap on slowly.

Tip: Use hose clips provided; do not kink hoses.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 9kg; distribute evenly.
Add detergent: Use drawer compartments as per detergent type.
Select program: Turn CONTROL dial (e.g., Synthetics for mixed fabrics).
Adjust options: Press OPTION to set temperature, spin speed, or delay.
Start: Press START/PAUSE; display shows time remaining.
Pause/Stop: Press START/PAUSE to pause; turn dial to reset for stop.
End of cycle: Machine beeps; remove laundry promptly.

WARNING! Do not open door during spin cycle. Wait for lock light to go off.

Safety Features

Child Lock: Locks controls when activated. Door Lock: Auto-locks during wash; unlocks at end. Anti-Flood: AquaStop shuts off water if leak detected. Imbalance Control: Reduces spin speed if load uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean filter every 3 months: Turn off water, place towel below, open filter cover, drain residual water, remove debris.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste disposal: Contact local council for recycling. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug socket; ensure child lock off.
No water intake	Taps/hoses/kinks	Open taps fully; check hose for kinks; clean inlet filter.
Leaking water	Loose connections	Tighten hoses; check detergent drawer is seated properly.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine on floor.
Drum not spinning	Imbalance/lid switch	Redistribute load; check for error codes (e.g., F05).

Reset: Unplug for 5 minutes; plug back in.

Service: 03448 113 113; www.hotpoint.co.uk