Hotpoint washing machine HB 93 CARE UK manual

The Hotpoint HB 93 CARE is a freestanding washing machine with a 9kg capacity, featuring multiple wash programmes, energy efficiency class A+++, spin speed up to 1300 rpm, delay timer, child lock, and AquaStop leak protection. Designed for UK household use with 230-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door seal, water inlet hoses, drain hose, adjustable feet, and filter.

Feature	Description
Capacity	9kg drum for large loads
Spin Speed	Up to 1300 rpm for efficient drying
Energy Rating	A+++ for low energy consumption
Programmes	15 programmes including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental programme changes
AquaStop	Leak protection system
Display	Digital display with time remaining and cycle indicators
Detergent Drawer	Compartments for pre-wash, main wash, and fabric softener
Adjustable Feet	For levelling on uneven floors

Installation

Unpack and remove transit bolts. Place on stable, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue markings) and machine.
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into mains socket.

WARNING! Do not use extension leads. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Power on: Press POWER button; display lights up.
Run initial wash: Select Cotton 90°C programme without laundry; add detergent to drawer.
Set preferences: Use SETTINGS button to adjust buzzer volume, display brightness.
Load laundry: Sort by fabric type and colour; do not overload.
Add detergent: Use drawer compartments as per detergent instructions.

CAUTION! Remove all packaging materials and transit bolts before use.

Specifications

Model: Hotpoint HB 93 CARE
Capacity: 9kg
Spin Speed: 1300 rpm (adjustable)
Energy Class: A+++
Water Pressure: 0.5 - 8 bar
Programmes: 15 including Eco, Quick 15', Wool, Silk
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 230-240V, 50Hz
Max Load: 2200W
Noise Level: Wash: 53 dB, Spin: 73 dB

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAMME selector, OPTIONS (Delay, Extra Rinse, etc.), CHILD LOCK, SETTINGS.

Display Icons: Time remaining, spin speed, temperature, delay start, child lock, door lock.

Programme Selection: Turn knob to desired programme (Cotton, Synthetics, Delicates, etc.). Options: Press OPTIONS to add Extra Rinse, Pre-wash, or reduce spin speed. Delay Timer: Set delay start up to 24 hours. Settings Menu: Adjust buzzer volume, display brightness, factory reset. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue-cold hose to cold tap; red-hot hose optional if machine supports hot fill. Drain: Place hose in standpipe (min 60 cm height) or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not overtighten.
Secure drain hose to prevent slipping.
Check for leaks after first connection.

Tip: Use AquaStop feature; if leak detected, machine shuts off water automatically.

Using Wash Programmes

Supports various fabrics and soil levels.

Sort laundry: By colour and fabric type.
Load machine: Do not exceed 9kg; distribute evenly.
Add detergent: Use drawer (I: pre-wash, II: main wash, *: softener).
Select programme: Turn knob (e.g., Cotton for towels/bedding).
Set options: Extra rinse, lower spin speed if needed.
Start: Press START/PAUSE; door locks automatically.
After wash: Remove laundry promptly; leave door ajar to dry drum.
Clean filter: Monthly; turn off water, open filter cover, drain residual water.

WARNING! Do not wash items soaked in solvents; remove coins/objects from pockets.

Care & Maintenance

Monthly: Clean detergent drawer, door seal, and filter. Yearly: Run maintenance wash at 90°C without laundry.

Cleaning: Wipe exterior with damp cloth; clean drawer by pulling out and rinsing. Descale: Use washing machine descaler every 3 months if in hard water area.

Safety Features

Child Lock: Disables controls. Door Lock: Automatically locks during wash; unlocks at end or if paused. Overheat Protection: Thermostat prevents overheating. Imbalance Control: Reduces spin speed if load uneven. AquaStop: Cuts water supply if leak detected.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016, WEEE Directive. CE marked. Energy label according to EU regulations. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug switched on; ensure door closed properly; press START.
No water intake	Taps/hoses/filter	Ensure taps on; check hoses not kinked; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose not blocked/too low; clean pump filter.
Excessive vibration	Transit bolts/levelling	Ensure transit bolts removed; adjust feet to level machine.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 mins, retry.
Detergent not dispensing	Drawer blocked	Clean detergent drawer compartments.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk