Hotpoint Washing Machine H8 W046SB UK Manual

The Hotpoint H8 W046SB is a freestanding washing machine with an 8kg capacity, A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, direct spray jet system, and AquaSave technology for efficient water usage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	8kg load capacity for family-sized washes
Energy Rating	A+++ for high energy efficiency
Spin Speed	Up to 1400 RPM for faster drying
Anti-Stain Technology	Automatic stain removal for common stains
Direct Spray Jet	Sprays detergent directly onto clothes for better cleaning
AquaSave Technology	Reduces water consumption per cycle
Delay Start	Program start delay up to 24 hours
Quick Wash	30-minute cycle for lightly soiled loads
Child Lock	Prevents accidental program changes
Digital Display	Shows remaining time, cycle stage, and error codes

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial setup cycle.

Remove packaging: Take out all internal packaging materials.
Run cleaning cycle: Select "Drum Clean" program without laundry.
Set preferences: Use control dial to select language, time, etc.
Load detergent: Fill compartments as per detergent instructions.

CAUTION! Ensure machine is level to prevent vibration and noise during spin cycles.

Specifications

Model: H8 W046SB UK
Capacity: 8kg
Energy Rating: A+++
Spin Speed: 1400 RPM
Water Pressure: 0.5 - 8 bar
Programs: 16 programs including Cotton, Synthetic, Delicates, Wool, Quick Wash
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V, 50Hz
Noise Level: 53 dB (washing), 73 dB (spinning)
Weight: 68kg

Controls and Settings

Access settings via rotary dial and button panel. Control Panel: POWER, START/PAUSE, OPTION buttons, rotary dial.

Programs: Cotton (40°C-90°C), Synthetic (30°C-60°C), Delicates (cold-40°C), Wool, Quick Wash (30 min), Drum Clean, Rinse & Spin, Spin Only.

Options: Extra Rinse, Pre-Wash, Delay Start, Reduced Creases, Speed Wash. Settings: Temperature selection, spin speed adjustment, child lock activation.

Connecting Water & Drain

Water Inlet: Cold water connection (and hot if model supports). Drain: Hose to standpipe or sink.

Turn off water supply before connecting hoses.
Use only provided hoses; do not reuse old ones.
Ensure drain hose is not kinked and is at correct height (60-100cm from floor).
Check for leaks after first connection.

Tip: Install a drip tray if placing machine on wooden floors.

Using Wash Programs

Supports various fabric types and soil levels.

Sort laundry: Separate by colour, fabric type, and soil level.
Load machine: Do not overload; leave space at top of drum.
Add detergent: Use compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn dial to desired program.
Adjust options: Press OPTION buttons for extra functions.
Start: Press START/PAUSE; display shows remaining time.
Pause/Stop: Press START/PAUSE to pause; turn dial to reset to stop.
Unload: Remove laundry promptly after cycle ends; leave door ajar to dry drum.

WARNING! Do not wash items contaminated with petrol, solvents, or chemicals. Remove coins and objects from pockets.

Care & Maintenance

Monthly maintenance: Clean detergent drawer, door seal, and filter. Run "Drum Clean" program monthly.

Cleaning: Wipe exterior with damp cloth; clean drawer by pulling out and rinsing. Clean filter by opening flap at bottom front and draining residual water first.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on door or control panel.

Safety Information

Read all instructions before use. Keep packaging away from children. This appliance is for household use only.

Electrical Safety: Plug into grounded outlet. Do not use extension cords. Do not touch with wet hands.

Child Safety: Use child lock feature. Supervise children near appliance.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 03448 226 226.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is firmly closed; check power outlet and fuse.
No water intake	Taps closed/hose kinked	Open water taps; check hose for kinks; clean inlet filter.
Water not draining	Drain hose blocked	Check drain hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine.
Error codes on display	Various faults	Consult manual error code list; reset by unplugging for 2 minutes.
Detergent not dispensing	Drawer blocked	Clean detergent drawer compartments.

Reset: Unplug for 2 minutes to reset electronic control.

Service: 03448 226 226; www.hotpoint.co.uk