Hotpoint washing machine H8 09ADS GPOWER IT manual

The Hotpoint H8 09ADS GPOWER IT is a freestanding washing machine with 9kg capacity, 1400 RPM spin speed, A+++ energy rating, and innovative GPOWER technology for efficient cleaning. It features multiple wash programs, a large LED display, direct injection motor, anti-vibration system, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with LED display, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging materials.

1. Position the machine: Place on flat, stable floor near water inlet and drain.
2. Connect water supply: Attach inlet hoses to cold water tap (blue marking) and machine.
3. Connect drain hose: Place in standpipe or sink (minimum height 60cm).
4. Level the machine: Adjust feet using spanner to ensure stability.
5. Plug into grounded electrical outlet.

WARNING! Do not remove transit bolts before positioning. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run an empty wash cycle to clean the drum.

1. Remove transit bolts completely and store for future moves.
2. Connect power and turn on machine with POWER button.
3. Select "Drum Clean" program or "Cotton 90°C" without laundry.
4. Add a small amount of detergent to drawer compartment II.
5. Start cycle and let complete.
6. Set language and other preferences via settings menu if available.

CAUTION! Never use machine without removing transit bolts - can cause serious damage.

Specifications

• Capacity: 9 kg (cotton).
• Spin Speed: 1400 RPM maximum.
• Energy Rating: A+++ (most efficient).
• Water Consumption: Approximately 52 liters per cycle (cotton 60°C).
• Noise Level: 53 dB (washing), 73 dB (spinning).
• Dimensions (HxWxD): 85 x 60 x 60 cm.
• Weight: 70 kg.
• Power Supply: 230-240V, 50Hz, 10A.
• Programs: 16 programs including Cotton, Synthetic, Delicate, Wool, Quick Wash.
• Special Features: GPOWER, Delay Start, Extra Rinse, Pre-wash, Child Lock.

Controls and Settings

Control Panel: POWER button, program selector knob, temperature button, spin speed button, option buttons (Delay Start, Extra Rinse, etc.), START/PAUSE button.

LED Display: Shows selected program, temperature, spin speed, remaining time, and active options.

Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicate, Wool, etc.). Temperature Setting: Press TEMP button to cycle through available temperatures (cold, 20°C, 30°C, 40°C, 60°C, 90°C). Spin Speed: Press SPIN button to adjust or select no spin. Options: Select additional functions like Pre-wash, Extra Rinse, Delay Start. Child Lock: Press and hold specific buttons (consult manual) for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water supply. Drain: Ensure drain hose is secured properly.

1. Turn off water supply before connecting hoses.
2. Use only supplied hoses; do not use old hoses.
3. Ensure drain hose is not kinked or bent sharply.
4. Drain hose height must be between 60-100 cm from floor.
5. Check for leaks after first connection.

Tip: Install a drip tray if placing machine on sensitive flooring.

Using Wash Programs

Select appropriate program for fabric type and soil level.

1. Sort laundry by color and fabric type.
2. Load machine: Do not exceed maximum capacity (9 kg).
3. Add detergent: Use compartment I for pre-wash, II for main wash, III for softener.
4. Select program using knob.
5. Adjust temperature and spin speed as needed.
6. Select any additional options (Extra Rinse, etc.).
7. Close door and press START/PAUSE.
8. After cycle completes, remove laundry promptly.

WARNING! Do not wash items contaminated with flammable substances. Balance load to prevent excessive vibration.

Special Functions

Delay Start: Set washing to begin later (1-24 hours). Extra Rinse: Adds additional rinse cycle. Pre-wash: For heavily soiled items. Quick Wash: 30-minute program for small, lightly soiled loads. Child Lock: Prevents accidental program changes. Drum Clean: Special program to clean drum and prevent odors (run monthly).

Care & Maintenance

Regular cleaning ensures optimal performance and longevity.

1. Clean detergent drawer monthly: Remove and rinse under water.
2. Clean door seal: Wipe rubber gasket to remove lint and residue.
3. Run Drum Clean program monthly without laundry.
4. Clean drain pump filter periodically (see manual for instructions).
5. Wipe exterior with damp cloth; never use abrasive cleaners.

CAUTION! Unplug machine before cleaning. Never hose down or use steam cleaners.

Regulatory Information

CE marked: Complies with European directives. Energy label: A+++ rating according to EU regulations. Waste electrical equipment should not be disposed with household waste. Recycle according to local regulations. For support, visit www.hotpoint.eu or contact local service center. Hotpoint is a trademark of Whirlpool Corporation.

Troubleshooting

Reset: Unplug for 1 minute, then restart. For persistent issues, contact service.

Service: Consult local Hotpoint service center; www.hotpoint.eu