Hotpoint washing machine H7 W945WB UK manual

The Hotpoint H7 W945WB is a freestanding washing machine with a 9kg capacity, A+++ energy rating, and 1400 RPM spin speed. It features Hotpoint's Anti-Stain Technology, Direct Spray wash system, UltraCare cycle for delicates, Steam Refresh function, and AquaSave technology for water efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg drum, LED display, program selector dial, detergent dispenser, filter access, water inlet valves, drain hose.

Feature	Description
Anti-Stain Technology	Automatically targets 16 common stains
Direct Spray	Sprays detergent directly onto clothes for better cleaning
UltraCare cycle	Gentle wash for delicate fabrics like wool and silk
Steam Refresh	Reduces wrinkles and odours without washing
AquaSave technology	Reduces water consumption by up to 50%
1400 RPM spin	High spin speed for faster drying times
Delay Start	Set wash to finish at a convenient time (up to 24 hours)
Quick Wash	30-minute cycle for lightly soiled loads
Child Lock	Prevents accidental program changes
LED Display	Shows remaining time, cycle stage, and error codes

Installation

Unpack and remove all transit bolts. Place on level, solid floor.

Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if applicable (red marker).
Connect drain hose: Place in standpipe (min height 60cm, max 100cm) or secure over sink edge.
Level the machine: Adjust front feet to ensure machine is stable; use spirit level.
Plug into 220-240V AC, 50Hz power outlet.

WARNING! Remove all transit bolts before use. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect hoses: Ensure rubber seals are in place; hand-tighten plus half turn with pliers.
Test for leaks: Turn on water tap briefly; check connections.
Run cleaning cycle: Select "Drum Clean" or "Cotton 90°C" with detergent drawer empty.

CAUTION! Do not use machine without removing transit bolts. Ensure drain hose is not kinked.

Specifications

Capacity: 9kg (cotton).
Energy Rating: A+++ (scale A+++ to D).
Spin Speed: 1400 RPM (adjustable).
Water Consumption: Approx. 45 litres per cycle (Eco 40-60).
Noise Level: 53 dB (washing), 75 dB (spinning).
Dimensions (HxWxD): 85cm x 60cm x 60cm.
Programs: 16 programs including Cotton, Synthetic, Delicates, Wool, Quick Wash.
Power Supply: 220-240V AC, 50Hz.
Weight: 70kg.

Controls and Settings

Control panel: Program selector dial, Start/Pause button, Option buttons, LED display.

Program Dial: Select from Cotton, Synthetic, Delicates, Wool, Quick Wash, Drum Clean, etc.

Options: Temperature (cold to 90°C), Spin Speed (0-1400 RPM), Delay Start (1-24h), Extra Rinse, Pre-Wash. Display: Shows time remaining, cycle stage, child lock icon, error codes. Settings: Press and hold "Delay Start" + "Spin Speed" for 3 seconds to access service menu (factory reset).

Connecting Water & Drain

Water Inlet: Cold (mandatory) and Hot (optional). Drain: Hose to standpipe or sink.

Turn off water taps before connecting hoses.
Connect inlet hoses: Blue to cold, red to hot (if used).
Secure drain hose: Use U-bend hook for standpipe; ensure no sagging.
Check for leaks: Run short rinse cycle after installation.

Tip: Use only new hoses; do not reuse old ones. Ensure drain hose height is correct to prevent siphoning.

Using Wash Programs

Select program based on fabric type and soil level.

Load clothes: Do not overload; leave space at top of drum.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn dial to desired cycle (e.g., Cotton 40°C).
Set options: Adjust temperature, spin speed, extra rinse if needed.
Start: Press Start/Pause; door locks automatically.
Pause/Stop: Press Start/Pause to pause; turn dial to reset to stop.
End of cycle: Door unlocks; remove clothes promptly to avoid wrinkles.

WARNING! Do not open door during wash; wait for unlock symbol. Check pockets for objects.

Special Functions

Anti-Stain: Automatically activated on Cotton and Synthetic programs. Steam Refresh: 20-minute cycle without detergent. Delay Start: Set wash to finish later. Child Lock: Press and hold "Delay Start" + "Start/Pause" for 3 seconds.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

CAUTION! Unplug before cleaning. Wipe with damp cloth; do not use abrasive cleaners.

Regulatory Information

UKCA/CE marked; complies with UK electrical safety standards. Energy label according to EU Regulation 2019/2014. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 0333 305 2265.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug is in socket; ensure child lock is off.
No water entering	Taps/blockage	Ensure water taps are on; check inlet hoses for kinks; clean filter.
Water not draining	Drain hose blocked	Check drain hose for kinks; clean pump filter.
Excessive vibration	Transit bolts/level	Ensure transit bolts removed; check machine is level; redistribute load.
Error code F05	Heater fault	Unplug for 5 minutes; restart. If persists, call service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0333 305 2265; www.hotpoint.co.uk