Hotpoint washing machine H7 W945WB IT manual

The Hotpoint H7 W945WB IT is a freestanding washing machine with a 7kg capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1400 RPM, delay timer, child lock, and anti-flood protection. Designed for 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

FeatureDescription
Capacity7kg laundry load
Spin SpeedUp to 1400 RPM
Energy ClassA (energy efficient)
ProgramsCotton, Synthetics, Delicates, Quick Wash, etc.
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Anti-FloodLeak protection system
DisplayDigital with time remaining indicator
DoorReversible opening (left/right)
Dimensions85cm H x 60cm W x 55cm D (approx.)

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Adjust feet: Turn to level machine; use spirit level.
  3. Connect water inlet: Attach hoses to hot/cold taps (if applicable); use supplied hoses.
  4. Connect drain hose: Place in standpipe or sink; secure with hook.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and power on; run initial empty wash.

  1. Set language: Press and hold PROGRAM button for 5 seconds to select ITALIANO (default).
  2. Test run: Select Cotton 60°C program without laundry; run to check connections.
  3. Adjust settings: Use OPTIONS button to set beep volume, end signal.
  4. Load detergent: Fill drawer compartments as per detergent instructions.

CAUTION! Ensure water taps are fully open and hoses are not kinked.

Specifications

Controls and Settings

Control Panel: POWER button, PROGRAM selector knob, START/PAUSE, OPTIONS buttons, digital display.

Display Icons: Time remaining, child lock, delay start, temperature, spin speed.

Program Selection: Turn knob to desired program (Cotton, Synthetics, etc.). Options: Press OPTIONS to select temperature (cold-90°C), spin speed (0-1400 RPM), extra rinse, pre-wash. Delay Timer: Set delay start up to 24 hours. Child Lock: Press and hold START/PAUSE for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to hot/cold taps (red/blue markers). Drain: Place hose in standpipe (max height 100cm) or sink.

  1. Ensure taps are off before connecting hoses.
  2. Use only supplied hoses; do not overtighten.
  3. Secure drain hose to prevent slipping.
  4. Check for leaks after first connection.

Tip: Install drain hose at correct height to ensure proper drainage.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 7kg; distribute evenly.
  2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
  3. Select program: Turn knob (e.g., Cotton for cottons).
  4. Set options: Temperature, spin speed, extra functions.
  5. Start: Press START/PAUSE; display shows time remaining.
  6. Pause/change: Press START/PAUSE to pause; wait for door lock to release.
  7. End of cycle: Machine beeps; remove laundry promptly.

WARNING! Do not open door during spin cycle. Wait for door lock indicator to go off.

Special Functions

Delay Start: Set delay up to 24 hours. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled loads. Speed Wash: Reduces time for lightly soiled loads. Child Lock: Locks controls during operation.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean drum: Run empty hot wash (90°C) with washing machine cleaner every 2 months. Check and clean pump filter if drainage slows.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact Hotpoint Italy customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lockCheck plug and power; ensure child lock is off; close door properly.
No water intakeTaps/hoses/filterEnsure taps are open; check hoses for kinks; clean inlet filter.
Water doesn't drainDrain hose/pump filterCheck hose for blockages; clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; re-level machine; redistribute load.
Error codes on displayVarious faultsRefer to error code list in manual; unplug for 5 minutes and retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Hotpoint service center; www.hotpoint.eu

Hotpoint washing machine H7 W945WB IT manual © - All Rights Reserved 2025