Hotpoint washing machine H7 99 GPOWER IT manual

The Hotpoint H7 99 GPOWER IT is a high-efficiency front-loading washing machine featuring a 9kg capacity, A+++ energy rating, 1400 RPM spin speed, multiple wash programs, steam function, anti-allergy cycle, delay timer, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, LED display, Program selector knob, Temperature selector, Spin speed selector, Steam function button, Delay start button.

Feature	Description
Capacity	9 kg maximum load
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Programs	15+ including Cotton, Synthetics, Delicates, Wool, Quick Wash
Steam Function	Reduces wrinkles and allergens
Anti-Allergy Cycle	Eliminates 99.9% of allergens
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
AquaStop	Leak protection system
Display	LED with time remaining and cycle indicators

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use wrench to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if available (red marker).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Level the machine: Adjust front feet to ensure machine is stable and does not vibrate.
Plug into grounded electrical outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed before first use.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Run empty wash: Select "Drum Clean" or "Maintenance" program at 90°C without detergent.
Set preferences: Use SETTINGS button to configure beep volume, language, etc.
Load detergent: Add to detergent drawer compartments (I: pre-wash, II: main wash, *: softener).

CAUTION! Ensure all packaging materials and transit bolts are removed. Check hose connections for leaks.

Specifications

Model: H7 99 GPOWER IT
Capacity: 9 kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 9,000 liters per year
Spin Speed: 1400 RPM (adjustable)
Noise Level: Wash: 53 dB, Spin: 75 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V, 50Hz
Max Power: 2100 W

Controls and Settings

Access functions via control panel. Main buttons: POWER, START/PAUSE, OPTIONS, SETTINGS.

Program Knob: Turn to select wash programs (Cotton, Eco, Synthetics, Delicates, Wool, Quick 30', Sport, Jeans, Baby, Drum Clean).

Temperature: Select from Cold, 20°C, 30°C, 40°C, 60°C, 90°C. Spin Speed: Select from No Spin, 400, 600, 800, 1000, 1200, 1400 RPM. Options: Steam, Extra Rinse, Pre-wash, Delay Start, Child Lock. Settings: Language, Beep volume, Demo mode.

Connecting Utilities

Water: Connect inlet hoses to taps. Drain: Place hose in standpipe (60-100 cm height). Power: Use grounded socket.

Ensure water taps are fully open.
Check drain hose is not kinked.
Do not use extension cords.

Tip: Use hose clips provided to secure connections. Check for leaks after first connection.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed max capacity; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash) and II (main wash).
Select program: Turn knob to desired program.
Adjust options: Press OPTIONS for Steam, Extra Rinse, etc.
Start: Press START/PAUSE; display shows time remaining.
Pause/Stop: Press START/PAUSE to pause; hold 3 seconds to cancel.
End of cycle: Machine beeps; door unlocks after a short delay.

WARNING! Do not open door during high-temperature washes. Remove items promptly after cycle to prevent wrinkles.

Special Functions

Steam Function: Reduces wrinkles by 30%, removes allergens. Use with "Steam Refresh" program. Anti-Allergy Cycle: Heats water to 60°C+ to eliminate dust mites and bacteria. Delay Start: Set wash to finish up to 24 hours later. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Detergent drawer: Pull out, rinse under warm water.
Door seal: Wipe with damp cloth to remove lint and residue.
Filter: Turn drain pump filter counterclockwise to remove; clean under running water.
Drum: Run "Drum Clean" program monthly without laundry.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE certified. Complies with EU directives for safety (LVD) and electromagnetic compatibility (EMC). Energy label according to EU Regulation 2019/2017. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +39 02 82 291.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is properly closed; check power outlet; press POWER.
No water intake	Taps closed/hose kinked	Open water taps; check hose for kinks; clean inlet filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine; redistribute load.
Water not draining	Drain hose/filter blocked	Check drain hose height (<100 cm); clean pump filter.
Error codes (E01-E10)	Various faults	Consult manual error code list; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes, then restart.

Service: +39 02 82 291; www.hotpoint.eu/service